Recent changes to Home

Home modified by aliazzz

aliazzz — Wed, 16 Sep 2020 08:52:43 -0000

--- v47
+++ v48
@@ -6,45 +6,27 @@
 [TOC]

 # CODESYS V3 MEGA-IO driver v2.0.0.0
-This driver is a IoDrvFB based wrapper around the Raspberry I2C MEGAIO driver v1.1.0.0 for CODESYS by [Sequent Microsystems](https://www.sequentmicrosystems.com/index.html).
+This driver is an experimental IoDrvFB based wrapper around the Raspberry I2C MEGAIO driver v1.1.0.0 for CODESYS by [Sequent Microsystems](https://www.sequentmicrosystems.com/index.html).

 [[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/MEGAIO.jpg?format=raw width=50%]]

-* This IO driver replaces the FB based program calls with mappable hardware channels,
-* To optimise I/O dataflow, some small codechanges to the I2C MEGAIO driver v1.1.0.0 were neccessary, 
-* 100% Open source,
-* 100% Pure IEC 61131-3 code (ST).
-
-Sequent Microsystems uploaded a video about the Mega IO Industrial for Raspberry Pi, check it out :
-[[embed url=https://www.youtube.com/watch?v=fNdZ7oo1mec]]
-
-
-## IO interface benefits
-
-* Simple I2C Address Parameter access;
-[[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20Parameters.png?format=raw width=60%]]
-
-* Hardware I/O Mapping instead of function block calls in your program
-[[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20IoMapping.png?format=raw width=60%]]
-
-* Example Project with visualisation
-[[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20Application%20Visualisation.png?format=raw width=60%]]
+This IO driver replaces the FB based program calls with mappable hardware channels. To optimise I/O dataflow, some small codechanges to the I2C MEGAIO driver v1.1.0.0 were neccessary.


 ## Changelog
-* v2.0.0.0 by Aliazzz under "Unlicense". Released on cForge. See https://forge.codesys.com/drv/io-drivers/database/Home/ for details.
+* v2.0.0.0 released under "Unlicense". Released on cForge. See https://forge.codesys.com/drv/io-drivers/database/Home/ for details.
 * v1.1.0.0 by [Sequent Microsystems](https://www.sequentmicrosystems.com/index.html) under "Unlicense".

 -----

-## i2c address setting
+# i2c address setting

-### install i2c tools
+## install i2c tools

 sudo apt-get update
 sudo apt-get install i2c-tools

-### MEGAIO i2c address
+## MEGAIO i2c address

 Be sure the MEGAIO is attached.

@@ -53,9 +35,9 @@

 The MEGAIO default address is 16#31 (41dec).

------

-##Package installation
+
+#Package installation
 ![](https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20package.png?format=raw )
 [[download url=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/tags/v2.0.0.0/package/IoDrvMEGAIO%20v2.0.0.0.package?format=raw label=Package]]

@@ -63,14 +45,3 @@

 * Double-click the package or via CODESYS IDE Package Manager,
 * Install the loose components via the Library / Device Repository, found under Tools menu option in CODESYS IDE.
-
-
------
-## Limitations / Bugs 
-If you experience any bugs or limitations, please leave a [Ticket](https://forge.codesys.com/drv/mega-io/tickets/)
-
-
------
-## Acknowledgements
-
-Special thanks goes out to Ingo Hornberger for helping out with difficulties and for his patience.

Home modified by aliazzz

aliazzz — Wed, 15 May 2019 15:34:09 -0000

--- v46
+++ v47
@@ -1,6 +1,6 @@
 [[members limit=20]]
 [[download_button]]
-[[download url=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/tags/v2.0.0.0/package/IoDrvMEGAIO%20v2.0.0.0.package?format=raw]]
+[[download url=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/tags/v2.0.0.0/package/IoDrvMEGAIO%20v2.0.0.0.package?format=raw label=Package]]

 [TOC]
@@ -57,7 +57,7 @@

 ##Package installation
 ![](https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20package.png?format=raw )
-[[download url=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/tags/v2.0.0.0/package/IoDrvMEGAIO%20v2.0.0.0.package?format=raw]]
+[[download url=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/tags/v2.0.0.0/package/IoDrvMEGAIO%20v2.0.0.0.package?format=raw label=Package]]

 Install the package via;

Home modified by aliazzz

aliazzz — Sun, 31 Mar 2019 08:56:15 -0000

--- v45
+++ v46
@@ -37,8 +37,16 @@

 -----

-## I2C address setting
-Start your Raspberry Pi with te MEGAIO attached.
+## i2c address setting
+
+### install i2c tools
+
+sudo apt-get update
+sudo apt-get install i2c-tools
+
+### MEGAIO i2c address
+
+Be sure the MEGAIO is attached.

 * Run sudo i2cdetect -y 0 => You should now see a table with the connected i2c slave address.
 * If Run sudo i2cdetect -y 0 does not work, Run sudo i2cdetect -y 1

Home modified by aliazzz

aliazzz — Fri, 25 Jan 2019 20:30:19 -0000

--- v44
+++ v45
@@ -56,7 +56,13 @@
 * Double-click the package or via CODESYS IDE Package Manager,
 * Install the loose components via the Library / Device Repository, found under Tools menu option in CODESYS IDE.

+
 -----
 ## Limitations / Bugs 
 If you experience any bugs or limitations, please leave a [Ticket](https://forge.codesys.com/drv/mega-io/tickets/)

+
+-----
+## Acknowledgements
+
+Special thanks goes out to Ingo Hornberger for helping out with difficulties and for his patience.

Home modified by aliazzz

aliazzz — Tue, 22 Jan 2019 20:25:27 -0000

--- v43
+++ v44
@@ -48,7 +48,7 @@
 -----

 ##Package installation
-![](https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20package.png)
+![](https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20package.png?format=raw )
 [[download url=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/tags/v2.0.0.0/package/IoDrvMEGAIO%20v2.0.0.0.package?format=raw]]

 Install the package via;

Home modified by aliazzz

aliazzz — Tue, 22 Jan 2019 20:24:13 -0000

--- v42
+++ v43
@@ -1,5 +1,6 @@
 [[members limit=20]]
 [[download_button]]
+[[download url=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/tags/v2.0.0.0/package/IoDrvMEGAIO%20v2.0.0.0.package?format=raw]]

 [TOC]
@@ -18,23 +19,7 @@
 [[embed url=https://www.youtube.com/watch?v=fNdZ7oo1mec]]

-# Changelog
-* v2.0.0.0 by Aliazzz under "Unlicense". Released on cForge. See https://forge.codesys.com/drv/io-drivers/database/Home/ for details.
-* v1.1.0.0 by [Sequent Microsystems](https://www.sequentmicrosystems.com/index.html) under "Unlicense".
-
------
-
-# I2C address setting
-Start your Raspberry Pi with te MEGAIO attached.
-
-* Run sudo i2cdetect -y 0 => You should now see a table with the connected i2c slave address.
-* If Run sudo i2cdetect -y 0 does not work, Run sudo i2cdetect -y 1
-
-The MEGAIO default address is 16#31 (41dec).
-
------
-
-# IO interface benefits
+## IO interface benefits

 * Simple I2C Address Parameter access;
 [[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20Parameters.png?format=raw width=60%]]
@@ -46,13 +31,32 @@
 [[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20Application%20Visualisation.png?format=raw width=60%]]

+## Changelog
+* v2.0.0.0 by Aliazzz under "Unlicense". Released on cForge. See https://forge.codesys.com/drv/io-drivers/database/Home/ for details.
+* v1.1.0.0 by [Sequent Microsystems](https://www.sequentmicrosystems.com/index.html) under "Unlicense".

 -----
-# Package

+## I2C address setting
+Start your Raspberry Pi with te MEGAIO attached.

+* Run sudo i2cdetect -y 0 => You should now see a table with the connected i2c slave address.
+* If Run sudo i2cdetect -y 0 does not work, Run sudo i2cdetect -y 1
+
+The MEGAIO default address is 16#31 (41dec).

 -----
-# Limitations / Bugs 
+
+##Package installation
+![](https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20package.png)
+[[download url=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/tags/v2.0.0.0/package/IoDrvMEGAIO%20v2.0.0.0.package?format=raw]]
+
+Install the package via;
+
+* Double-click the package or via CODESYS IDE Package Manager,
+* Install the loose components via the Library / Device Repository, found under Tools menu option in CODESYS IDE.
+
+-----
+## Limitations / Bugs 
 If you experience any bugs or limitations, please leave a [Ticket](https://forge.codesys.com/drv/mega-io/tickets/)

Home modified by aliazzz

aliazzz — Tue, 22 Jan 2019 19:13:00 -0000

--- v41
+++ v42
@@ -5,7 +5,7 @@
 [TOC]

 # CODESYS V3 MEGA-IO driver v2.0.0.0
-This driver is a IoDrvFB based wrapper around the Raspberry I2C MEGAIO driver v1.1.0.0 for CODESYS by [Sequent Microsystems](https://www.sequentmicrosystems.com/index.html). It is written for educational purpose only.
+This driver is a IoDrvFB based wrapper around the Raspberry I2C MEGAIO driver v1.1.0.0 for CODESYS by [Sequent Microsystems](https://www.sequentmicrosystems.com/index.html).

 [[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/MEGAIO.jpg?format=raw width=50%]]

Home modified by aliazzz

aliazzz — Tue, 22 Jan 2019 19:06:46 -0000

--- v40
+++ v41
@@ -19,11 +19,8 @@

 # Changelog
-* v2.0.0.0 info
-
-Initial release on cForge. See https://forge.codesys.com/drv/io-drivers/database/Home/ for details.
-
-[[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/trunk/screenshots/IoDrvMEGAIO%20Information.png?format=raw width=60%]]
+* v2.0.0.0 by Aliazzz under "Unlicense". Released on cForge. See https://forge.codesys.com/drv/io-drivers/database/Home/ for details.
+* v1.1.0.0 by [Sequent Microsystems](https://www.sequentmicrosystems.com/index.html) under "Unlicense".

 -----

Home modified by aliazzz

aliazzz — Tue, 22 Jan 2019 18:59:01 -0000

--- v39
+++ v40
@@ -5,21 +5,24 @@
 [TOC]

 # CODESYS V3 MEGA-IO driver v2.0.0.0
-This driver is a IoDrvFB based wrapper around the CODESYS Raspberry I2C MEGAIO driver v1.1.0.0 by [Sequent Microsystems](https://www.sequentmicrosystems.com/index.html).
+This driver is a IoDrvFB based wrapper around the Raspberry I2C MEGAIO driver v1.1.0.0 for CODESYS by [Sequent Microsystems](https://www.sequentmicrosystems.com/index.html). It is written for educational purpose only.

 [[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/MEGAIO.jpg?format=raw width=50%]]

+* This IO driver replaces the FB based program calls with mappable hardware channels,
 * To optimise I/O dataflow, some small codechanges to the I2C MEGAIO driver v1.1.0.0 were neccessary, 
 * 100% Open source,
-* 100% Pure IEC 61131-3 code (ST)
+* 100% Pure IEC 61131-3 code (ST).

-Sequent uploaded a video about the Mega IO Industrial for Raspberry Pi, check it out :
+Sequent Microsystems uploaded a video about the Mega IO Industrial for Raspberry Pi, check it out :
 [[embed url=https://www.youtube.com/watch?v=fNdZ7oo1mec]]

 # Changelog
 * v2.0.0.0 info
-    Initial release in cForge. See https://forge.codesys.com/drv/io-drivers/database/Home/ for details.
+
+Initial release on cForge. See https://forge.codesys.com/drv/io-drivers/database/Home/ for details.
+
 [[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/trunk/screenshots/IoDrvMEGAIO%20Information.png?format=raw width=60%]]

 -----
@@ -34,8 +37,7 @@

 -----

-# IO interface
-The IO interface of this driver has been reworked to accomodate a simple but more powerful approach:
+# IO interface benefits

 * Simple I2C Address Parameter access;
 [[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20Parameters.png?format=raw width=60%]]
@@ -43,17 +45,17 @@
 * Hardware I/O Mapping instead of function block calls in your program
 [[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20IoMapping.png?format=raw width=60%]]

-* The Example Project with visualisation
+* Example Project with visualisation
 [[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20Application%20Visualisation.png?format=raw width=60%]]

 -----
 # Package
-Sorry, work in progress!
+

 -----
 # Limitations / Bugs 
-See [Tickets](https://forge.codesys.com/drv/mega-io/tickets/)
+If you experience any bugs or limitations, please leave a [Ticket](https://forge.codesys.com/drv/mega-io/tickets/)

Home modified by aliazzz

aliazzz — Sat, 12 Jan 2019 19:24:55 -0000

--- v38
+++ v39
@@ -38,13 +38,13 @@
 The IO interface of this driver has been reworked to accomodate a simple but more powerful approach:

 * Simple I2C Address Parameter access;
-[[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/trunk/screenshots/IoDrvMEGAIO%20Parameters.png?format=raw width=60%]]
+[[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20Parameters.png?format=raw width=60%]]

 * Hardware I/O Mapping instead of function block calls in your program
-[[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/trunk/screenshots/IoDrvMEGAIO%20IoMapping.png?format=raw width=60%]]
+[[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20IoMapping.png?format=raw width=60%]]

 * The Example Project with visualisation
-[[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/trunk/screenshots/IoDrvMEGAIO%20Application%20Visualisation.png?format=raw width=60%]]
+[[img src=https://forge.codesys.com/drv/mega-io/code/HEAD/tree/screenshots/IoDrvMEGAIO%20Application%20Visualisation.png?format=raw width=60%]]