Recent changes to Home

Home modified by Ingo

Ingo — Fri, 16 Feb 2018 14:40:35 -0000

--- v32
+++ v33
@@ -26,4 +26,4 @@
 **Step 3:** Now you can start programming.

 On the picture below you can see an example of the retro-games project. For example you can insert a "Box" out of your ToolBox which is very easy to program.
-[[img src=PLC_PRG.PNG alt=Image]]
+[[img src=PLC_PRG.PNG/thumb alt=Image]]

Home modified by Ingo

Ingo — Fri, 16 Feb 2018 14:40:14 -0000

Home modified by Ingo

Ingo — Fri, 16 Feb 2018 14:39:06 -0000

--- v30
+++ v31
@@ -1,15 +1,14 @@
 # How to bind a Rotary Encoder

-Hardware
----
+## Hardware
 This library supports currently only the rotary encoder KY040. But it should support more in the future.

-Usage
----
+## Usage
 The exact usage of the driver depends on the hardware and the implementation of the driver. As this varies a bit, every driver has its own documentation.

 * [KY040]

+## Example Project
 As an example we will use the Raspberry Pi 1 Model B. You also have to install [CODESYS Control for Raspberry Pi SL](https://store.codesys.com/codesys-control-for-raspberry-pi-sl.html).

 ***Setup:***

Home modified by Ingo

Ingo — Fri, 16 Feb 2018 08:56:54 -0000

--- v29
+++ v30
@@ -10,7 +10,7 @@

 * [KY040]

-As an example we will use the Raspberry Pi 1 Model B. You also have to install [CODESYS Control for Raspberry Pi SL](https://store.codesys.com/codesys-control-for-raspberry-pi-sl.html?___store=default).
+As an example we will use the Raspberry Pi 1 Model B. You also have to install [CODESYS Control for Raspberry Pi SL](https://store.codesys.com/codesys-control-for-raspberry-pi-sl.html).

 ***Setup:***
 Now connect the outputs of the KY040 with the Raspberry Pi like this:

Home modified by codesys.com

codesys.com — Thu, 15 Feb 2018 12:37:18 -0000

--- v28
+++ v29
@@ -13,7 +13,7 @@
 As an example we will use the Raspberry Pi 1 Model B. You also have to install [CODESYS Control for Raspberry Pi SL](https://store.codesys.com/codesys-control-for-raspberry-pi-sl.html?___store=default).

 ***Setup:***
-Now connect the outputs of the first KY040 with the Raspberry Pi like this:
+Now connect the outputs of the KY040 with the Raspberry Pi like this:
 CLK --> GPIO - Pin
 DT --> GPIO - Pin
 SW --> GPIO - Pin
@@ -26,5 +26,5 @@
 **Step 2:** Go to Tools -> Library Repository and Install the RotaryEncoder.library
 **Step 3:** Now you can start programming.

-On the picture below you can see an example of the retro-games project. As a sample if you insert a "Box" out of your ToolBox it is very easy to program it.
+On the picture below you can see an example of the retro-games project. For example you can insert a "Box" out of your ToolBox which is very easy to program.
 [[img src=PLC_PRG.PNG alt=Image]]

Home modified by codesys.com

codesys.com — Thu, 15 Feb 2018 11:55:37 -0000

--- v27
+++ v28
@@ -14,9 +14,9 @@

 ***Setup:***
 Now connect the outputs of the first KY040 with the Raspberry Pi like this:
-CLK --> GPIO 0
-DT --> GPIO 1
-SW --> GPIO 3
+CLK --> GPIO - Pin
+DT --> GPIO - Pin
+SW --> GPIO - Pin
 + --> 5.0 VDC Power
 GND --> 0 V (Ground)

Home modified by codesys.com

codesys.com — Thu, 15 Feb 2018 10:59:54 -0000

--- v26
+++ v27
@@ -20,7 +20,7 @@
 + --> 5.0 VDC Power
 GND --> 0 V (Ground)

-At this point you could install another KY040 if you want to play for example ["retro-games"](https://forge.codesys.com/lib/retro-games/wiki/Home/).
+At this point you could install another KY040, in the same way but different pinouts like the first one, if you want to play for example ["retro-games"](https://forge.codesys.com/lib/retro-games/wiki/Home/).

 **Step 1:** In your CODESYS Development System open or create a project.
 **Step 2:** Go to Tools -> Library Repository and Install the RotaryEncoder.library

Home modified by codesys.com

codesys.com — Thu, 15 Feb 2018 10:57:20 -0000

--- v25
+++ v26
@@ -11,6 +11,7 @@
 * [KY040]

 As an example we will use the Raspberry Pi 1 Model B. You also have to install [CODESYS Control for Raspberry Pi SL](https://store.codesys.com/codesys-control-for-raspberry-pi-sl.html?___store=default).
+
 ***Setup:***
 Now connect the outputs of the first KY040 with the Raspberry Pi like this:
 CLK --> GPIO 0

Home modified by codesys.com

codesys.com — Thu, 15 Feb 2018 10:56:56 -0000

--- v24
+++ v25
@@ -9,7 +9,7 @@
 The exact usage of the driver depends on the hardware and the implementation of the driver. As this varies a bit, every driver has its own documentation.

 * [KY040]
-* 
+
 As an example we will use the Raspberry Pi 1 Model B. You also have to install [CODESYS Control for Raspberry Pi SL](https://store.codesys.com/codesys-control-for-raspberry-pi-sl.html?___store=default).
 ***Setup:***
 Now connect the outputs of the first KY040 with the Raspberry Pi like this:

Home modified by codesys.com

codesys.com — Thu, 15 Feb 2018 10:55:52 -0000

--- v23
+++ v24
@@ -7,10 +7,10 @@
 Usage
 ---
 The exact usage of the driver depends on the hardware and the implementation of the driver. As this varies a bit, every driver has its own documentation.
+
 * [KY040]
-
+* 
 As an example we will use the Raspberry Pi 1 Model B. You also have to install [CODESYS Control for Raspberry Pi SL](https://store.codesys.com/codesys-control-for-raspberry-pi-sl.html?___store=default).
-
 ***Setup:***
 Now connect the outputs of the first KY040 with the Raspberry Pi like this:
 CLK --> GPIO 0