https://forge.codesys.com/forge/talk/CODESYS-V2/thread/021aa18bc3/2020-02-27T20:42:36.212000ZRecent posts to BC9000 installtarget file???2020-02-27T20:42:36.212000Z2020-02-27T20:42:36.212000ZGulywarehttps://forge.codesys.com/u/gulyware/https://forge.codesys.comb77b918f049fcc19024a005b709e11ac4588ba03

<div class="markdown_content"><blockquote> <p><strong>arj3090 hat geschrieben:</strong><br/> I have used the BC9000 in multiple occasions.<br/> When you start a new project in TwinCAT PLC Control, select BC via AMS for ethernet comms. If you have the serial programming cable then slect BC via serial.</p> </blockquote> <p>THX.</p> <p>But this one I knew already...I thought it's possible to use Codesys from 3S instead of the Twincat program.</p> <p>Anyway, I made the test with Twincat and was fine.</p> <p>Regards</p> <p>Gulyware</p></div>

2020-02-27T20:42:34.820000Z2020-02-27T20:42:34.820000Zarj3090https://forge.codesys.com/u/arj3090/https://forge.codesys.com0d7eed861deb5017bc25045bf8d487db062bcffc

<div class="markdown_content"><p>I have used the BC9000 in multiple occasions.</p> <p>When you start a new project in TwinCAT PLC Control, select BC via AMS for ethernet comms. If you have the serial programming cable then slect BC via serial.</p></div>

2020-02-27T20:42:33.427000Z2020-02-27T20:42:33.427000ZGulywarehttps://forge.codesys.com/u/gulyware/https://forge.codesys.com536e2c49fd840bd8375f0813f0b62f12331afdd2

<div class="markdown_content"><p>Did anybody used BC9000 from Beckhoff so far? I have a little project with that and there is no BC9000 in Target settings.I have TwinCat installed (from Beckhoff same as CodeSys 2.3 ) but this one is time limited. I was searching on the net if there is TNF or TRG file to install available...but Nothing I found.</p> <p>If someone has it share it with me PLEASE.</p> <p>THNX</p> <p>Gulyware</p></div>