https://forge.codesys.com/forge/talk/CODESYS-V2/thread/2ff323b222/2020-02-27T22:16:57.853000ZRecent posts to JUMO mTRON T2020-02-27T22:16:57.853000Z2020-02-27T22:16:57.853000Zshooterhttps://forge.codesys.com/u/shooter/https://forge.codesys.combd955bd8124e96f1b3bea100e7a9e859c96b8a45

<div class="markdown_content"><p>first attempt is to make a very simple program to make an output to true</p> <p>var<br/> out1 at %QX0.0:bool:=false;<br/> end_var<br/> this is above the line<br/> below write<br/> out1:=true;</p> <p>try above and revert with comment.</p></div>

2020-02-27T22:16:53.540000Z2020-02-27T22:16:53.540000Zdelxzenhttps://forge.codesys.com/u/delxzen/https://forge.codesys.com998773d1d5e0a1b0e0a71739b97a7a4d100109cb

<div class="markdown_content"><p>Just about getting started with JUMO mTRON T system. I’m well familiar with programming in general and an expert in PLC programming. But I'm new to both CoDeSys and the mTRON T. I have (tried to) made a small PLC application with CoDeSys, just to observe if digital inputs can be read and outputs set by a PLC application. But I'm not getting anywhere. Anyone with experience with the JUMO mTRON T CPU and it's PLC functionality?</p></div>