https://forge.codesys.com/forge/talk/CODESYS-V2/thread/50b513c55f/2020-02-27T21:45:55.907000ZRecent posts to Parallel coils in ladder2020-02-27T21:45:55.907000Z2020-02-27T21:45:55.907000Zshooterhttps://forge.codesys.com/u/shooter/https://forge.codesys.com1883ef0ff18e156530a9ba51f831fbff2cc0fb46

<div class="markdown_content"><p>in version 3 it is possible but in version 2 it is not possible in ladder logic, however in other like ST or SFC and CFC it is possible. In IL it is also possible as but difficult.</p> <p>In LD the coil (or any output must be a boolean and can not be questioned again<br/> only solution for this is use multiple networks and use the result from the previous or build it as many times as needed and use dummy outputs.<br/> watch it when using outputs as inputs there is a difference when you use markers or real outputs as they are only scanned at the end of program.<br/> i am meaning that if you set a coil in a program and you are asking if it is set on the next line it will be on however in real the output is not on yet.</p></div>

2020-02-27T21:45:54.423000Z2020-02-27T21:45:54.423000ZJAPIBhttps://forge.codesys.com/u/japib/https://forge.codesys.com30092eee520b06c33c61728d62800cc13b3a03aa

<div class="markdown_content"><p>No way to do this as you draw. With ladder Logic in CoDeSys parallel coils must be diven by the same equation.<br/> But you can write 3 networks, one for each coil with its own equation<br/> It's a bit longer to write, but you can use the copy and paste. And it will work. </p></div>

2020-02-27T21:45:50.197000Z2020-02-27T21:45:50.197000ZTitushttps://forge.codesys.com/u/titus/https://forge.codesys.comaafcc77be44d28723fb2d8ac4ae533b221f26b96

<div class="markdown_content"><p>Hi everyone,</p> <p>I've question with Ladder logic in Codesys. Is there eny way to achive parallel coils like picture below.</p> <p>Thanks for your help.</p> <p><img alt="IMG: Bild" rel="nofollow" src="http://i1106.hizliresim.com/2011/6/23/14073.jpg"/></p></div>