https://forge.codesys.com/forge/talk/CODESYS-V2/thread/5ec6d9f503/2020-02-27T19:14:25.872000ZRecent posts to Visualisation buttons not registering2020-02-27T19:14:25.872000Z2020-02-27T19:14:25.872000Zshooterhttps://forge.codesys.com/u/shooter/https://forge.codesys.com57f33a5c1d5690074e06f70924a82027ea7b86ea

<div class="markdown_content"><p>estop is hardwired as you say , so it will overwrite whatever you have in your simulation.<br/> btw it is bad practice to mix hard and soft switches.<br/> better to make an parallel between both or even better make them in series so if anyone is activated the machine stops.</p> <p>Emergency stop should stop a machine hardwise so it must be wired to the big contactors.</p></div>

2020-02-27T19:14:24.652000Z2020-02-27T19:14:24.652000Zceeceeshttps://forge.codesys.com/u/ceecees/https://forge.codesys.com59ac48c6009670a2b27bbb34af15a4d55909ec31

<div class="markdown_content"><p>Hi</p> <p>I have a visualisation in a program of mine which I use as a sort of software HMI. I can manually toggle outputs for testing and set-up purposes and generally works quite well.</p> <p>However, I cannot get the reset and E-stop buttons to register when clicking on them in on-line mode. When testing the visualisation in simulation mode, it works. These buttons are hard-wired, so I wouldn't be able to E-stop the machine via the visualisation (as expected), but it doesn't even register that I am pressing the reset button (which I would expect it to).</p> <p>Anyone have any ideas why I am seeing this behaviour?</p></div>