https://forge.codesys.com/forge/talk/CODESYS-V2/thread/6bff0df2ff/2020-02-27T19:13:28.115000ZRecent posts to Web visualization using EasySoft Codesys, anyone?2020-02-27T19:13:28.115000Z2020-02-27T19:13:28.115000Zluke.skywalkerhttps://forge.codesys.com/u/luke-skywalker/https://forge.codesys.com907846f6712b1b2163a91da31a98b6b788dceee3

<div class="markdown_content"><p>Thank you very much, JAPIB. It worked!</p></div>

2020-02-27T19:13:24.767000Z2020-02-27T19:13:24.767000ZJAPIBhttps://forge.codesys.com/u/japib/https://forge.codesys.comf72f498b00d4a6fe027aec2ed12c01df2402f722

<div class="markdown_content"><p>Hello<br/> To access the files in the PLC (XC-CPU201-XV) directly, you must use a FTP Client like Filezilla Client. With this soft you can acces different memories of the XC200 PLC.<br/> You just have to connect as "anonymous".</p></div>

2020-02-27T19:13:23.561000Z2020-02-27T19:13:23.561000Zshooterhttps://forge.codesys.com/u/shooter/https://forge.codesys.com6564c34ddbd1fb19e80372b9fff88043deac7a90

<div class="markdown_content"><p>sure you can just type in the ip number like 192.168.1.102 or something you have set it on.</p></div>

2020-02-27T19:13:20.202000Z2020-02-27T19:13:20.202000Zluke.skywalkerhttps://forge.codesys.com/u/luke-skywalker/https://forge.codesys.com911dc3fb4b7bea92a5391d3a3c4e33adb5cc65ce

<div class="markdown_content"><p>Thank you very much for your reply, Paul.</p> <p>Yes, I have the latest version of Java and the webvisualization is enabled. Too bad it is slow switching, but I will create an instance of the 2nd visualization in PLC_VISU and use a "Hide" button, to simulate the same thing.</p> <p>However, do you have any idea how can I access the PLC, like Windows Explorer or FTP? I can't find anything in the documentation files from Moeller, though it is possible I haven't searched enough.</p></div>

2020-02-27T19:13:18.981000Z2020-02-27T19:13:18.981000Zshooterhttps://forge.codesys.com/u/shooter/https://forge.codesys.com19811bd21459fbcdd448877e4afe4575892efbf6

<div class="markdown_content"><p>See that you are running a late version of java, is the webvisualisation button on in resources, and yes it is slow switching, however if you stay on same page it is faster.<br/> The webvisu is only updated in every cycle.</p></div>

2020-02-27T19:13:15.617000Z2020-02-27T19:13:15.617000Zluke.skywalkerhttps://forge.codesys.com/u/luke-skywalker/https://forge.codesys.com14a76317e384e29b55f56eb979741330b76ca17d

<div class="markdown_content"><p>I got it.</p> <p>It seems that none of the things I mentioned matters. I was just omitting to specify the port :8080. It worked smoothly with <a class="" href="http://192.168.119.200:8080/webvisu.htm" rel="nofollow">http://192.168.119.200:8080/webvisu.htm</a>.<br/> But, as I have seen, it works rather slowly. I have 2 visualizations (PLC_VISU and VISU1) and a button in the first one that _ to the other when pressed. Actually, I command some drivers for 2 step motors in the first one (using several parameters and then press "Execute") and I simulate the motors moving in VISU1. After executing a routine configured, I press the button for the 2nd visualization and, by the time it shows up, the movement is finished and I see nothing.</p> <p>Is there some way to make it faster? Or, am I not implementing this idea right?<br/> And, by the way, the last 2 questions from my post above remain a puzzle for me.</p> <p>Thanks again.</p></div>

2020-02-27T19:13:14.398000Z2020-02-27T19:13:14.398000Zluke.skywalkerhttps://forge.codesys.com/u/luke-skywalker/https://forge.codesys.com3f0bc42711bb96b57b51c437e7633cd7f83e1db8

<div class="markdown_content"><p>Hello.</p> <p>Has anyone done a web visualization in EasySoft Codesys? I can't get a grasp on it. I have made a visualization called PLC_VISU, I had every setting in Codesys right, but when I type 192.168.119.200/webvisu.htm in Chrome I get nothing but a low-resolution picture of an XC201 (the Moeller PLC I'm using) and a line saying "XSystem".</p> <p>I have read the instructions on how to set it and the only thing I have problems with is setting a Webserver. How do you do it? In the manual it says you have to write commands (such as "webserver.exe -s"), but WHERE do you type them? Also, I have a version of EasySoft Codesys that seems to be demo (as Licence Manager tells me) and I do not find any webserver.exe or webserver_config.xml in the directory C:\Program Files\Moeller Software\easy Soft CoDeSys V2.3.9\easy Soft CoDeSys\Visu. If I type "filedir" in Codesys&gt;PLC Browser, I can see that there are those 2 files.</p> <p>Another 2 questions, off-topic.<br/> How is it possible to access the files in the PLC (XC-CPU201-XV) directly, like explorer or smth like that?<br/> And, when you type 192.168.119.200 in your browser, shouldn't you get a menu, to configure the webserver and access files? Another way put, shouldn't I see a ftp and a menu?</p> <p>Thank you, kindly, in advance.</p></div>