Creating a simple Delay

2022-04-28T20:18:27.493000Z

some notes on your code

FOR vCount := 0 TO 1999 DO    //NOTE:  vCount gets reset to 0 on every scan of the PLC
    vVsample[vCount] := INT_TO_REAL(WORD_TO_INT(vVin));

    Delay(IN:=TRUE, PT:=T#1S);  //It's usually best to put timers outside of loops
    IF NOT(Delay.Q) THEN  //<--this condition will only be true once per second.  On every other scan cycle of the PLC, Delay.Q will be false.  
       RETURN;  //RETURN exits the whole function block, not the loop itself.  
                //To exit a loop, use EXIT
                //this RETURN will happen on every scan except once/second
    END_IF
    Delay(IN:=FALSE);  //this will only be scanned once/second, because of the above RETURN statement
vCount := vCount + 1;  //this would cause vCount to count by twos, because the FOR loop already increments vCount every time it loops  (if you want to count up my multiples, you could use FOR vCount:= 0 TO 1999 BY 2 DO, for example).  If you want to manually increment your loop counter, use WHILE, or use a different variable.  But, it's not actually being scanned most of the time, for the same reason as the previous line
END_FOR

Creating a simple Delay

2022-04-28T14:30:19.363000Z

FOR vCount := 0 TO 1999 DO something ; end_for
vCount already increase 0 to 1999 on every each task sample time.
why you add INT_TO_REAL(WORD_TO_INT(vVin));
and why you need this vCount + 1;
what you wanna do i couldnt understand but check your vCount value.

Creating a simple Delay

2022-04-21T11:09:59.402000Z

Hello All,

Im new to the forum and to CoDeSYS.

Im trying to create a function block which needs a timer unfortunately all examples I have found do not work I guess I make a beginner error. I hope someone want to help me

FOR vCount := 0 TO 1999 DO

vVsample[vCount] := INT_TO_REAL(WORD_TO_INT(vVin));

Delay(IN:=TRUE, PT:=T#1S);
IF NOT(Delay.Q) THEN
   RETURN;
END_IF
Delay(IN:=FALSE);
vCount := vCount + 1;


END_FOR

I use here a delay of 1s for testing purposes at the end it should sample faster. This code I placed in a function block which is inside a loop that should run each 2s which I setup in the taskconfiguration.

I hope someone could help me understand why the counter doesn't count up, infact Delay.Q never seems to get True.

Thanks in advance

Recent posts to Creating a simple Delay

Creating a simple Delay

Creating a simple Delay

Creating a simple Delay