https://forge.codesys.com/forge/talk/CODESYS-V2/thread/7a3dde0120/2020-02-27T19:58:59.571000ZRecent posts to Adam 6060 connection2020-02-27T19:58:59.571000Z2020-02-27T19:58:59.571000ZMark Stillmanhttps://forge.codesys.com/u/mark-stillman/https://forge.codesys.com4f3b640fe3bd0bd9b2f37f3cae76f956e842b2dd

<div class="markdown_content"><p>Hi, at present in using a 750-842, looking at finally using a 750-881.</p></div>

2020-02-27T19:58:58.259000Z2020-02-27T19:58:58.259000Zshooterhttps://forge.codesys.com/u/shooter/https://forge.codesys.comf1d462fda09bc38d57777c26d4d8f50710eb938e

<div class="markdown_content"><p>depending on the type of wago you want, you can send any message to the adam system. However you could consider a translator just for simple connection and software.</p></div>

2020-02-27T19:58:54.261000Z2020-02-27T19:58:54.261000ZMark Stillmanhttps://forge.codesys.com/u/mark-stillman/https://forge.codesys.com22d4060338bb71139ff039665c24a3bc4d9515b4

<div class="markdown_content"><p>Hi,<br/> fairly new to the progamming side of external kit on Codesys.<br/> Need some help please, im trying to connect to an ADAM 6060 module, Its modbus over ip.<br/> Im using it as we have a lot of kit out, that used these. <br/> We used to use the Advantech Studio Software which is horrible. So im trying to move them onto Codesys with Wago.<br/> I have no idea where to start on this, im presuming i will need to use the modbus lib.<br/> any help would be greatfully recieved.<br/> thanks<br/> Mark</p></div>