https://forge.codesys.com/forge/talk/CODESYS-V2/thread/92adc53b1c/2020-02-27T19:44:27.114000ZRecent posts to Codesys V3.5 SP7 windows 10 setup problems2020-02-27T19:44:27.114000Z2020-02-27T19:44:27.114000ZRainbirdhttps://forge.codesys.com/u/rainbird/https://forge.codesys.comc19adeee5cdec8415ada34d28d876f988908ff53

<div class="markdown_content"><p>Dear all,</p> <p>For my education I require the program Codesys. The installed version V3.5 SP7 which runs under Win10. <br/> But I'm facing two problems and I have searched quiet a lot but probaly looking in the wrong direction.</p> <p>First isseu.<br/> For this education I have to setup a machine controlled by a PLC, Therefore I only have to write a program and I can use every PLC so I would like to use the visualization to make it easier to simulate the in and outputs of the PLC. But after setup a small program just to check if it works I can run the simulation in the device.application.PLC tab and it highlight was is happening. But when I create a visualization the it gives an error and say something about "exception" <br/> Can I not run the visualisation because of a license issue, or the fact that I did not add a actual PLC to the program, or an other reason</p> <p>Second isseu.<br/> For a small home project I would like to program a Easy819-AC-RC PLC from Eaton, but Eaton or Moeler is not listed in the PLC list of Codesys, how can I manage to add this PLC to a project. I have searched Youtube and the manual but could not trace this.</p> <p>Can anyone help me out<br/> Best Regards <br/> Rainbird</p> <p>Edit:<br/> I found the answer for isseu 1 in this topic<br/> l <a class="" href="http://forum.codesys.com/viewtopic.php?f=11&amp;t=6352" rel="nofollow">viewtopic.php?f=11&amp;t=6352</a> l <br/> Same story for me</p></div>