%d representation with decimal part

2020-02-27T19:14:49.459000Z

JAPIB hat geschrieben:
To do that you can, in the settings of a rectangle (by example) write :
Category Text -> Content: %2.1f //display format for a REAL, with 2 digits before point and 1 digit after
Category variable -> Textdisplay : INT_TO_REAL(MyVar)/10 //conversion of the INT into REAL, then division by 10

great it works! I 100% miss I can use conversion function into HMI, good to know.
Thanks

%d representation with decimal part

2020-02-27T19:14:45.911000Z

Hello,

If I understand you idea, you want to :
dispay 10.0 if MyVar=100
display 10.2 if Myvar=102
and so on ...

To do that you can, in the settings of a rectangle (by example) write :
Category Text -> Content: %2.1f //display format for a REAL, with 2 digits before point and 1 digit after
Category variable -> Textdisplay : INT_TO_REAL(MyVar)/10 //conversion of the INT into REAL, then division by 10

Another solution could be :
Category Text -> Contente: %2.1f //display format for a REAL, with 2 digits before point and 1 digit after
Category variable -> Textdisplay : INT_TO_REAL(MyVar) //conversion of the INT into REAL
Conversion factor : 0.1 //Division by 10

It works ... but you can't change the value of MyVar directly by this rectangle. You can't have a text imput with a such equation.
If you want to change the value of MyVar, you have to add another rectangle close the display (I put it in the background under the first, letting it go a little beyond, so I can click on it).
In this second rectangle you can display MyVar with %d and configure a text input.

It's just an idea. Maybe there is a smarter solution ?

%d representation with decimal part

2020-02-27T19:14:44.691000Z

I need to visualize into Codesys 2.3 HMI an INT value like this:
myVAR:INT;
100 = 10.0 sec

is there some way to get 10.0 visualization using INT? I found this

but if it's ok on reading, when I write it miss 0.1 : ex I write 10 , then I should expect 100 into INT var but I get 99!

Any help is appreciated

Recent posts to %d representation with decimal part

%d representation with decimal part

%d representation with decimal part

%d representation with decimal part