Read real values in a .txt files with SysFileRead: possible?

2020-02-27T19:55:32.634000Z

You can also try this.
A real number has 32bits in Codesys. So you can try the following:

Read your real number, using SysFileRead, into a variable declared in the memory (eg. %MD8200), in double word (DWORD) format.
Declare a real variable at the same marker address (eg. %MD8200) and you have got your real number.

Example:

BufferDWord AT %MD8200:DWORD;
BufferReal AT %MD8200:REAL;

BufferDWord=SysFileRead(...);
YourRealNumber=BufferReal;

Regards,
Lucian

Read real values in a .txt files with SysFileRead: possible?

2020-02-27T19:55:31.346000Z

the comma and the dot are language dependent, i would follow the english version, easier as you can not change the comma in a CDF.
have a look into the oscat library.

Read real values in a .txt files with SysFileRead: possible?

2020-02-27T19:55:27.712000Z

Hello,

In fact, the SysFileRead, take the byte value of every digit. For example in .csv file: the value to read is -0,013, first line. I will have finally in my "buffer":

and then '$R' and '$N' for Return and New line.

After I transform the byte in ascii with a IL_Byte_to_Ascii (something like that, I don't remember the right name). Present in Library of codesys.

Then you use a CONCAT for several digit (used '$R' and '$N' to stop concat). In the end you have a string with the value '-0,013'. You can use now the conversion string_to_real in order to have the real value.

PAY ATTENTION that with a ',' (comma) the conversion string_to_real will not work, you MUST have '.' (point).

'-0.013' will give -0.013 in the real value.

Until now I didn't find something faster to read a real in a . csv or .txt...

Regards,

Read real values in a .txt files with SysFileRead: possible?

2020-02-27T19:55:26.418000Z

what about STRING_TO_REAL

Read real values in a .txt files with SysFileRead: possible?

2020-02-27T19:55:22.753000Z

Hello,

I try to read "Real values" from a .txt files (~5000 parameters), directly on the Flash card of my Rexroth PLC. I can open it with SysFileOpen and I can read value from it with SysFileRead but, i received information in Byte... So in place to have 20 different positions, I have data in Byte, so maybe an array of 100 bytes...

Is it possible to read directly the different real positions and store it in a array of real?

Thank you for your help,

Bests regards,

Fred

Recent posts to Read real values in a .txt files with SysFileRead: possible?

Read real values in a .txt files with SysFileRead: possible?

Read real values in a .txt files with SysFileRead: possible?

Read real values in a .txt files with SysFileRead: possible?

Read real values in a .txt files with SysFileRead: possible?

Read real values in a .txt files with SysFileRead: possible?