Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Communication Error CR0452 PCAN_USB

rolllmex
2021-09-30
2021-10-02
  • rolllmex - 2021-09-30

    Hello,

    I'm having touble with my project, I can't program my ifm CR0452 device with Codesys V2.3. I have communication error(#0). But I don't have any trouble for communication with the Maintenance Tools (I can ping without any problem). I'm using a PCAN-USB for the communication between my laptop and the CR0452, and a power supply (10V). The parameters of communication should be ok (I know the DownloadID:127 and the baudrate(250), and the CAN Card Driver:PCAN_USB (since I use a PcanUSB)). Do you have any solution or advice to where could the problem comes from, I'm stucked.

     
  • rolllmex - 2021-09-30

    le nom était PEAK_USB...

     
  • rolllmex - 2021-09-30
     

    Last edit: rolllmex 2021-09-30
  • rolllmex - 2021-09-30

    le nom était PEAK_USB...

     
  • rolllmex - 2021-09-30

    le nom était PEAK_USB...

     
  • rolllmex - 2021-09-30
     

    Last edit: rolllmex 2021-09-30
  • rolllmex - 2021-09-30

    le nom était PEAK_USB...

     
  • rolllmex - 2021-09-30
     

    Last edit: rolllmex 2021-09-30
  • rolllmex - 2021-09-30
     

    Last edit: rolllmex 2021-09-30
  • jaguerop - 2021-10-02

    tuve el mismo problema se soluciono cuando le cambie de ID, atravez del codigo proporcionado por IFM

     

Log in to post a comment.