https://forge.codesys.com/forge/talk/CODESYS-V2/thread/dfa45e1859/2020-02-27T19:05:50.035000ZRecent posts to Newbie - how to format decimal values2020-02-27T19:05:50.035000Z2020-02-27T19:05:50.035000Zshooterhttps://forge.codesys.com/u/shooter/https://forge.codesys.com3791e4d68c1064f8ba41aadabc4bbc2326030962

<div class="markdown_content"><p>it looks correct but it is not correct.<br/> you must first take off the 3 lower bits and then divide by resolution (12 bits )is 4096.<br/> the lower bits are used as status bits.<br/> the highest is not used</p> <p>the minimum is 8 and the maximum is 32760 so division is 32752<br/> if status, changes the value is changing when using your way.</p> <p>hope you got it.<br/> not clear in manual.</p> <p>in oscat function block ain1 explains this</p></div>

2020-02-27T19:05:48.835000Z2020-02-27T19:05:48.835000ZROmanFettyhttps://forge.codesys.com/u/romanfetty/https://forge.codesys.comf1a9972b7b2bf16675e664456447470baaa4da82

<div class="markdown_content"><p>that rocks<br/> thank YOU:)</p></div>

2020-02-27T19:05:47.646000Z2020-02-27T19:05:47.646000Zrudolstohttps://forge.codesys.com/u/rudolsto/https://forge.codesys.com1a8e47e7672937885578800642e59c84d935ecfc

<div class="markdown_content"><p>Yes, that did it</p> <p>Thanks </p></div>

2020-02-27T19:05:44.266000Z2020-02-27T19:05:44.266000ZIgor Petrovhttps://forge.codesys.com/u/igor-petrov/https://forge.codesys.com9f2360331cc32d7d6674f3389379c266eb38c036

<div class="markdown_content"><p>Vis. element configuration:</p> <p>Text: <strong>%3.1f </strong></p> <p>Variables, Textdisplay: <strong>(.AI_1 /REAL#32760) * 100</strong></p> <p>Regards </p></div>

2020-02-27T19:05:43.080000Z2020-02-27T19:05:43.080000Zrudolstohttps://forge.codesys.com/u/rudolsto/https://forge.codesys.com1119996f7cde3d9885ee4358593bf5f428f0e8d0

<div class="markdown_content"><p>Hi </p> <p>I'm trying to make a visualisation with analogue inputs. This application has previousely been presentet in MoviconX.</p> <p>The input values from Wago 750-466, is treated this way: AI_1 * 1000 / 32760.</p> <p>This results in a analogue range of 0-1000.</p> <p>In Movicon this is formatted as 0.0 to 100.0 °C.</p> <p>Using %3.1f in CoDeSys does'nt display this value with one decimal</p> <p>I assume that the input should have been in REAL format but a block with the name LIMITALARM needs this input in INT format.</p> <p>I can change the formula to get the range to 0-100 but a temperature monitoring system is'nt usable with that lousy resolution.</p> <p>Is there a way to format the analogue value only in the visualisation or is there another way to solve this issue? </p> <p>Any replay is higly appreciated </p></div>