https://forge.codesys.com/forge/talk/CODESYS-V2/thread/e55612fd8a/2020-02-27T21:09:39.135000ZRecent posts to Configure the analog input2020-02-27T21:09:39.135000Z2020-02-27T21:09:39.135000Zshooterhttps://forge.codesys.com/u/shooter/https://forge.codesys.com7cfed584c517ecf4eca9ac2bc8666d6b72b8d68e

<div class="markdown_content"><p>try %IW0</p> <p>remember to shift all digitals one word up.</p> <p>the input is in integer and depending on the type of input so scaling will be needed.</p> <p>for example they start at 8 for zero as bits 1,2,3 are used for digital.</p> <p>they stop at 32760 for same</p> <p>so you need shifting a little</p></div>

2020-02-27T21:09:35.015000Z2020-02-27T21:09:35.015000ZRafaelLenzi89https://forge.codesys.com/u/rafaellenzi89/https://forge.codesys.com3d1e5958341cb5be395b32b9a75f7b5433bf203d

<div class="markdown_content"><p>I have one problem for configure the analog input, i have a one current transducer for read the phase current motor, my program is reading the voltage is not reading the current. How configure the analog input for read current?</p></div>