https://forge.codesys.com/forge/talk/CODESYS-V2/thread/ef40584d92/2020-02-27T23:28:31.113000ZRecent posts to Hardwareconfig for two 750 841 Wago Controller2020-02-27T23:28:31.113000Z2020-02-27T23:28:31.113000ZCole tricklehttps://forge.codesys.com/u/cole-trickle/https://forge.codesys.comcbc217c17cd570222546e4980034d7baf22adb9f

<div class="markdown_content"><p>That's all I needed to know.</p> <p>Thanks!</p></div>

2020-02-27T23:28:29.466000Z2020-02-27T23:28:29.466000Zshooterhttps://forge.codesys.com/u/shooter/https://forge.codesys.comdfee497592cbe8082d0b1b4b687266dd94aba6d8

<div class="markdown_content"><p>you will have to make a copy of your program, one for the master and one for the slave.<br/> when a unit is switched over (probably an anlog unit, the system is not correct and gives an error</p></div>

2020-02-27T23:28:24.562000Z2020-02-27T23:28:24.562000ZCole tricklehttps://forge.codesys.com/u/cole-trickle/https://forge.codesys.comd921c54d2f807e79585ed0d78d7756c6d7f35109

<div class="markdown_content"><p>hi everyone,</p> <p>got here a quick question, which I am hoping somebody out there can help me on this one.</p> <p>got here one codesys project with two 750 841 controllers. Program had been written already. The data communication has been established between the two controllers via the function_block "Ethernet_ModbusMaster_UDP". It works - so far so good.</p> <p>One of the controllers (main controller) has been configured under Resources - Hardwareconfiguration in my program. Second controller (I/O indicator light flashing) tells me that there is no hardware configuration, or the configuration has not been made properly.</p> <p>Where and How can I create the Hardwareconfiguration for the second one. </p> <p>I ll be grateful for some help!</p></div>