How to program blinking alarm sequences?

2020-02-27T23:23:57.873000Z

Here is a code for your project in ST.

you could easly do an function_block for this...

Variables

PROGRAM PLC_PRG
VAR
   Timer_LED_On         : TON;
   Timer_Led_Off         : TON;
   Timer_five_Sec_Pause   : TON;
   LED_Output            : BOOL;
   Start_Blink_seq         : BOOL;
   Alarm_counter         : BYTE;
   Alarm_Type            : BYTE;
END_VAR

The code...

(* Activation of 5 sec. timer  *)
Timer_five_Sec_Pause(IN:=TRUE,PT:=T#5s);
(* After 5 sec. activate the blink function. *)
IF Timer_Five_Sec_Pause.Q = TRUE THEN
   Start_Blink_Seq := TRUE;
END_IF
(* How many blinks will we have on the LED? *)
Alarm_Type := 3; (* For instance 3 blinks every 5 sec... *)
(* Here is the sequence for the blinking... Checking if the 5 sec. timer has been reached *)
(* Also checking if the alarmtype is more than 0. 0= No alarm = No blinking *)
IF (Start_Blink_seq = TRUE) AND (Alarm_Type > 0) THEN
   (* First we activate the timer to lighten up the LED *)
   Timer_LED_On(IN:=TRUE, PT:= T#250ms);
   IF Timer_LED_On.Q = TRUE THEN
      (* counting how many times the LED has been blinking *)
      IF LED_Output = FALSE THEN Alarm_counter := Alarm_Counter + 1; END_IF
      (* Activation of the LED e.g DigitalOut1 *)
      LED_Output := TRUE;
      (* When the LED is on we starting the timer to turn it off *)
      Timer_Led_Off(IN:=TRUE, PT:=T#250ms);
      IF Timer_LED_Off.Q = TRUE THEN
         (* Turning off the LED *)
         LED_Output := FALSE;
         (* Resetting both timers for on and off *)
         Timer_LED_On(IN:=FALSE);
         Timer_LED_Off(IN:=FALSE);
         (* Also checking if we have blinked enough... *)
         IF Alarm_Counter >= Alarm_Type THEN
            (* Resetting the 5 sec. timer... *)
            Timer_Five_sec_Pause(IN := FALSE);
            (* Setting the routine to false and waiting for the 5 sec. timer again *)
            Start_Blink_Seq := FALSE;
            (* Resetting the counter for how many blinks that we had been doing with the LED. *)
            Alarm_Counter := 0;
         END_IF
      END_IF
   END_IF
END_IF

How to program blinking alarm sequences?

2020-02-27T23:23:56.237000Z

Hi,

please find a small solution attached. Surely there are a hundred of other solutions possible .

I hope this helps you nevertheless

blinker_test.pro [31.64 KiB]

How to program blinking alarm sequences?

2020-02-27T23:23:51.636000Z

I have a project in school where we have to program a oil separator. The program has 5 different alarms. The control of the separator has only one alarm led and therefore we would like this alarm led to make different blinking sequences so the specific alarm is know to the operator. We have tried the "Blink" function blok but with little luck. The blinking sequency we would like to be like: on for 5 sec. and then short blinking of maybe ½ sec. and then 5 sec continous on again. illustrated: --------------- 5sec ()-()-()-() ---------------- 5sec

Hope you can help us.

-Thanks

Recent posts to How to program blinking alarm sequences?

How to program blinking alarm sequences?

How to program blinking alarm sequences?

How to program blinking alarm sequences?