RS232 Serial communication problems

2020-02-27T23:19:29.059000Z

Think you for your replay.

I have tried it with and without handshake. I have also tried it without closing the port between sending messages. Here is the code I am using.

IF xStartTest THEN

        //The parameters are set for the COM Port
        aCom1Params[1].udiParameterId := COM.CAA_Parameter_Constants.udiPort;
        aCom1Params[1].udiValue := 1; // the correct Port should be adapted
        aCom1Params[2].udiParameterId := COM.CAA_Parameter_Constants.udiBaudrate;
        aCom1Params[2].udiValue := 115200;
        aCom1Params[3].udiParameterId := COM.CAA_Parameter_Constants.udiParity;
        aCom1Params[3].udiValue := COM.PARITY.NONE;
        aCom1Params[4].udiParameterId := COM.CAA_Parameter_Constants.udiStopBits;
        aCom1Params[4].udiValue := COM.STOPBIT.ONESTOPBIT;
        aCom1Params[5].udiParameterId := COM.CAA_Parameter_Constants.udiTimeout;
        aCom1Params[5].udiValue := 0;
        aCom1Params[6].udiParameterId := COM.CAA_Parameter_Constants.udiByteSize;
        aCom1Params[6].udiValue := 8;
        aCom1Params[7].udiParameterId := COM.CAA_Parameter_Constants.udiBinary;
        aCom1Params[7].udiValue := 0;

        // Handshake Paramet

        //aCom1Params[8].udiParameterId := COM.udiDtrControl;
        //aCom1Params[8].udiValue := 16#02; // handshake
        //aCom1Params[9].udiParameterId := COM.udiOutxDsrFlow;
        //aCom1Params[9].udiValue := 1; // true
        //aCom1Params[10].udiParameterId := COM.udiRtsControl;
        //aCom1Params[10].udiValue := 16#02; // handshake
        //aCom1Params[11].udiParameterId := COM.udiOutxCtsFlow;
        //aCom1Params[11].udiValue := 1; // true

        // Handshake Parameter

        aCom1Params[8].udiParameterId := COM.udiInX;
        aCom1Params[8].udiValue := 1; // true
        aCom1Params[9].udiParameterId := COM.udiXonChar;
        aCom1Params[9].udiValue := 17;
        aCom1Params[10].udiParameterId := COM.udiXonLim;
        aCom1Params[10].udiValue := 2048;
        aCom1Params[11].udiParameterId := COM.udiOutX;
        aCom1Params[11].udiValue := 1; // true
        aCom1Params[12].udiParameterId := COM.udiXoffChar;
        aCom1Params[12].udiValue := 19;
        aCom1Params[13].udiParameterId := COM.udiXoffLim;
        aCom1Params[13].udiValue := 512;
        aCom1Params[14].udiParameterId := COM.udiTXContinueOnXoff;
        aCom1Params[14].udiValue := 0; // false




    END_IF

IF xPortOpen THEN
//The first Port is opened with the given parameters
como1(xExecute := TRUE, usiListLength:=SIZEOF(aCom1Params)/SIZEOF(COM.PARAMETER),pParameterList:= ADR(aCom1Params));

        IF como1.xError THEN
            xCom1OpenError := TRUE;
            iState := 1000;
        END_IF
        IF como1.xDone THEN
            iState := 10;
        END_IF

END_IF

IF xWrite THEN
// the write process is started for the first port
comw1(xExecute := TRUE,hCom:= como1.hCom,pBuffer:= ADR(sWrite),szSize:= SIZEOF(sWrite));

        IF comw1.xError THEN
            xCom1WriteError := TRUE;
        END_IF

        // if the writing process is completed the reading process can be started
        IF comw1.xDone THEN
            iState := 15;
        END_IF
    END_IF

IF xPortClose THEN

     // The first port is closed and the used handle released
        comc1(xExecute := TRUE, hCom:= como1.hCom);

        IF comc1.xError THEN
            xCom1CloseError := TRUE;
        END_IF

        IF comc1.xDone OR comc1.xError THEN             
            iState := 1000;
        END_IF
END_IF

RS232 Serial communication problems

2020-02-27T23:19:27.402000Z

check the handshake and do you close the communication after sending.

RS232 Serial communication problems

2020-02-27T23:19:22.811000Z

I am new to this forum and I am just beginning to us codesys.

I am trying to get communication between berghof EC1000 and roboteq 2130. I am using 232 serial port. I am using a program I got from the codesys store ( http://store.codesys.com/serial-com.html ). I am using Codesys v3.5 SP1 Patch 4.

My problem is that I can send one message through the serial port whit out any problems, but when I try to do it again nothing happens. Then I have to logout from the project and download it again to be able to send the messages again.

Can anybody please help me with this problem?

Recent posts to RS232 Serial communication problems

RS232 Serial communication problems

RS232 Serial communication problems

RS232 Serial communication problems