addressing other memories than register memory

2020-02-27T23:16:03.669000Z

Originally created by: tw0face

awsome thanx for ur reply it helped alot, now i can define variable in that memory, put anything i need there and read it with jamod

u made my day

thanx again!

addressing other memories than register memory

2020-02-27T23:15:59.127000Z

Hello tw0face,

i don’t know the jamod library but i think you use modbus TCP.

With modbus you have access for some memory areas.

If you want to get a variable from the plc then you have to place this variable at

a defined memory address.

Example

VAR

speed AT%MW0 : INT;

temp AT%MW1 : INT:

END_VAR

Note :

You have to administrate the used addresses by yourself and

you have to pay attention for the wordalignment.

With your jamod library you have access to the %M area from address 12288 (0x3000) up to

16383 (0x3FFF) means %MW0 …%MW4095

For more information see the follow link

http://www.wago.com/wagoweb/documentation/app_note/a3000/a300003e.pdf

Uwe

addressing other memories than register memory

2020-02-27T23:15:57.467000Z

Originally created by: tw0face

hello

im a new into all this kind of stuff so ill try to explain my problem the best i can. we have a few wago modules so far. and we are developing our own application to work with it.

our goal is to be able to read anything from the wago itself. i managed to get working the jamod library, so now i can read/write digital/analog registers. this is very good, but what is more, i need to be able to also read (somehow, anyhow) the variables of program running in wago. meaning, that i made a program in codesys, that's measuring temperature for example. i put this value into some retain variable, but dont put it on some register.

my question is, how can i read the variable in retain memory, i think its a different type of memory then the one u can address like %IX2.0 etc..

as well as any other type of memory thats included in wago modules..

im sure there is a way how u can do this, because codesys itself reads the variable for example from retain memory when u open the program, connect to wago and run it..

well..i hope i made sense

please i really need your help!

thanx in advance!

Recent posts to addressing other memories than register memory

addressing other memories than register memory

addressing other memories than register memory

addressing other memories than register memory