https://forge.codesys.com/forge/talk/CODESYS-V2/thread/fb54b4e62d/2020-02-27T19:33:02.486000ZRecent posts to The configuration file of the PLC2020-02-27T19:33:02.486000Z2020-02-27T19:33:02.486000Zshooterhttps://forge.codesys.com/u/shooter/https://forge.codesys.com53857980bde1d3cadcda827a97cf06088a0226da

<div class="markdown_content"><p>what make is the device, as codesys does not sell any PLC only a software version of its program, and many other SDK etc.</p></div>

2020-02-27T19:33:01.242000Z2020-02-27T19:33:01.242000Zallnewhttps://forge.codesys.com/u/allnew/https://forge.codesys.com92c5f6aac0d66818440b062d95f857b88e22e06b

<div class="markdown_content"><p>Good day! Have controller with support for IEC . The programming of the controller is carried out via Codesys 2.3.9 .<br/> Primary controller configurations are defined in configuration file with extension CFG.<br/> In this configuration, the possibility of the controller to work on CAN interface. This configuration allows you to configure the controller in the network<br/> CanOpen tab in the PLC Configuration . The task of ensuring in this way the configuration of the PLC in the rtu network Modbus.<br/> Question : What positions should be added to the configuration file and what revision myrts.exe required to read these items. Where can I read about it.<br/> Thank you.</p></div>