https://forge.codesys.com/forge/talk/Engineering/thread/08c125c5b8/2020-09-11T06:04:27.246000ZRecent posts to Android sensors setup2020-09-11T06:04:27.246000Z2020-09-11T06:04:27.246000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.comd0dabd54d41f2236e6eb96988c5cd7ff485c226e

<div class="markdown_content"><p>Does a Ping work between Android Phone and IFM PLC?</p></div>

2020-09-10T20:36:17.311000Z2020-09-10T20:36:17.311000Zdavidredondohttps://forge.codesys.com/u/davidredondo/https://forge.codesys.com4ffa0e5d695b11e83008d2f181569543a1029187

<div class="markdown_content"><p>Hello, many thanks for your answer.<br/> I tested that but it doesn't work.<br/> I attached a capture of my network area, maybe it is helpful</p></div>

2020-09-10T04:45:48.529000Z2020-09-10T04:45:48.529000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.comb06f8018116005a6dbbd162de13abb6c443be236

<div class="markdown_content"><p>I would try to change the netvars broadcast address to a network broadcast...<br/> the IFM device does probably not work with 255.255.255.255 change this to you network range 192.168.1.255 as example, if you net work is... 192.168.1.x</p></div>

2020-09-09T20:23:30.387000Z2020-09-09T20:23:30.387000Zdavidredondohttps://forge.codesys.com/u/davidredondo/https://forge.codesys.com46a831683549f3eee022d5163ea9e3f57137383c

<div class="markdown_content"><p>Hello, I have a similar problem. I have an ifm Electronic HMI as PLC (CR1077) and y configure the network, but the problem is that my gateway port on my Codesys project is 1217, and cell phone app send data by port #1202 and cannot change it. Any idea to communicate my cell phone app (CodesysSensor) to my ifm Electronic HMI? It is possible?</p> <p>I have not problem to connect on virtual Codesys PLC and receive data.</p></div>

2020-02-27T15:04:58.388000Z2020-02-27T15:04:58.388000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com44c7df5be841fd69f47cd40eaf857f8f919fd495

<div class="markdown_content"><p>Hi,<br/> they need to be in the same network (android and plc)<br/> BR<br/> Edwin</p></div>

2020-02-27T15:04:57.741000Z2020-02-27T15:04:57.741000Zlesaew1984https://forge.codesys.com/u/lesaew1984/https://forge.codesys.comd36fab647cced6a6d843f33098fd4d65bfbbac72

<div class="markdown_content"><p>Do I have to use the devices hotspot to connect the controller, or can they both just be on the same network interface?</p></div>

2020-02-27T15:04:56.974000Z2020-02-27T15:04:56.974000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.comf08f0f63627ae5ec0c7c05ba202ba0338f51a970

<div class="markdown_content"><p>Hi,<br/> the most important is this list here:<br/> This must 100% fit, because These liste is exactly used in the android app to send the values:<br/> The upper Application is only a dummy application to have this list accessible as receive list.</p> <p>//This gobal variable list is received via the network.<br/> //Sender: NVL <span>[SensorDataGenerator: PLC Logic: DataGenerator]</span><br/> //Protocol: UDP</p> <div class="codehilite"><pre><span></span><span class="nt">VAR_GLOBAL</span> <span class="err"> </span> <span class="err"> </span><span class="nt">wVersion</span><span class="o">:</span> <span class="nt">WORD</span> <span class="o">:=</span> <span class="nt">16</span><span class="p">#</span><span class="nn">00_01</span><span class="o">;</span> <span class="err"> </span> <span class="err"> </span><span class="nt">wCounter</span><span class="o">:</span> <span class="nt">WORD</span><span class="o">;</span> <span class="err"> </span> <span class="err"> </span><span class="nt">dwFeatures</span><span class="o">:</span> <span class="nt">DWORD</span><span class="o">;</span> <span class="err"> </span> <span class="err"> </span><span class="nt">Data</span><span class="o">:</span> <span class="nt">SensorValues</span><span class="o">;</span> <span class="err"> </span> <span class="err"> </span><span class="nt">strCommand</span><span class="o">:</span> <span class="nt">STRING</span><span class="o">(</span><span class="nt">70</span><span class="o">);</span> <span class="nt">END_VAR</span> </pre></div> <p>BR<br/> Edwin</p> <p><img alt="IMG: NVL.jpg" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=3396"/></p> <p><img alt="IMG: VarListSensorApp.jpg" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=3395"/></p></div>

2020-02-27T15:04:55.112000Z2020-02-27T15:04:55.112000Zlesaew1984https://forge.codesys.com/u/lesaew1984/https://forge.codesys.com7fff752f288b754f36d03b5ac5b689702dd6d0d2

<div class="markdown_content"><p>Thanks for the help so far but I am still unable to get it to work. I am getting a bunch of errors when I try to download to the device. Lets say I wanted to create a new project and just monitor screen rotation. How would I go about setting that up?</p></div>

2020-02-27T15:04:54.438000Z2020-02-27T15:04:54.438000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.comf02c22487e8c0f2f93355f19633773b985a065c6

<div class="markdown_content"><p>Hi,<br/> You just need to download the second one... first one is only placeholder for the netvarlist. <br/> BR<br/> Edwin</p></div>

2020-02-27T15:04:53.777000Z2020-02-27T15:04:53.777000Zlesaew1984https://forge.codesys.com/u/lesaew1984/https://forge.codesys.com616e8e549115d5a693aabc366e34a077f7fcad1f

<div class="markdown_content"><p>One problem I have been having with the example program is that it includes two devices, Datagenerator and receiver. Do I load both devices to the raspberry pi and which one do I run?</p></div>