https://forge.codesys.com/forge/talk/Engineering/thread/0f5be5bfbb/2022-09-07T20:43:41.901000ZRecent posts to PFC200 - Profinet2022-09-07T20:43:41.901000Z2022-09-07T20:43:41.901000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com842f3f9a2033ef8b0b35d7e7f189fb5afebbbf2f

<div class="markdown_content"><p>you need to separate the interfaces (setting in the WBM) I guess. ( the use BR1 for Profinet)<br/> In case it turns out that the performance is not enough, I would choose:<br/> <a href="https://www.wago.com/de/sps/edge-controller/p/752-8303_8000-002" rel="nofollow">https://www.wago.com/de/sps/edge-controller/p/752-8303_8000-002</a><br/> and use the Wago TP 600 package from CODESYS store.<br/> This will work and is due the fact that it is a quad-core system more usable for Profinet - I think the PFC<br/> is ( depends on the number of Profinet slaves very quickly at the border).</p></div>

2022-09-07T13:38:23.616000Z2022-09-07T13:38:23.616000Zakewaghttps://forge.codesys.com/u/akesting/https://forge.codesys.coma47e36b18d8ba26139571c4bfad7bb2c29b45674

<div class="markdown_content"><p>Hello, in a new project I want to use the PFC200-8215 as a profinet master. I struggle getting the pn_controller up and running. Besides that I want to use the ports x3 and x4 in switched mode of the PFC 200 for profinet instead of only one port.<br/> <img src="./attachment/07-09-_2022_15-16-44.png" width="50%"/></p> <p>I've tried changing a lot of settings but can't seem to figure it out, would appreciate all the help i can get, thanks!</p></div>