https://forge.codesys.com/forge/talk/Engineering/thread/16449b3af6/2020-02-27T13:53:46.186000ZRecent posts to Complex route with Gateway V32020-02-27T13:53:46.186000Z2020-02-27T13:53:46.186000ZRotulehttps://forge.codesys.com/u/rotule/https://forge.codesys.come2008c6621b76ce209817cd1d995d234cee109d8

<div class="markdown_content"><p>I am thinking of using a virtual ethernet adapter with a VPN connection, if that make sense.</p></div>

2020-02-27T13:53:46.012000Z2020-02-27T13:53:46.012000ZRotulehttps://forge.codesys.com/u/rotule/https://forge.codesys.com12ab7f40952f54b25c0dc0670e0d38f93fc97e9b

<div class="markdown_content"><p>Hello everyone,</p> <p>I have an embeded ECU which uses Codesys and is used on a vehicle, I would like to set up a remote programming tool for me to be able to update the software remotely (I already have that but right now its a Windows based PC and it not cost effective).</p> <p>I am thinking of using a raspberry pi as a Client that would be connected to the Ethernet port of my ECU AND to a 3G connexion to the internet. I already have a setup in which I can connect to this RPI but I would like to be able to connect my CodeSys gateway on my PC at the Office to that particular ECU in the field. So I can remote debug the software if needed and update it.</p> <p>SO my question is, How can I set the route of the gateway if the connexion is not local and not in the same subnet. For me being able to set the route manually would work.</p></div>