https://forge.codesys.com/forge/talk/Engineering/thread/187060f841/2024-02-21T07:39:15.621000ZRecent posts to EWON2024-02-21T07:39:15.621000Z2024-02-21T07:39:15.621000Zmartincapdhttps://forge.codesys.com/u/martincapd/https://forge.codesys.com1731f3666de2134814fa08ededbc41e7331a65df

<div class="markdown_content"><p>I have the same problem in that I can connect to the eWon and ping the controller IP Address, however I cant connect through CodeSys. Our system was programmed using Codesys v3.5.10.5.</p> <p>I'm using Gateway-1 which is configured to use "IP-Address: localhost" and "Port: 1217". Rather than scanning the network for devices, I enter the IP Address of the device, codesys returns a "No Device is repsonding..." message. See attached.</p> <p>I'm wondering if the IP-Address used Gateway-1 should be "localhost" or the WAN/LAN IP of the eWon?</p> <p>Thanks for the help</p> <p>MC</p></div>

2024-02-21T07:39:09.089000Z2024-02-21T07:39:09.089000Zmartincapdhttps://forge.codesys.com/u/martincapd/https://forge.codesys.com80b97e887ed1adde18d0aed88723ef242d3c2b67

<div class="markdown_content"><p>I have the same problem in that I can connect to the eWon and ping the controller IP Address, however I cant connect through CodeSys. Our system was programmed using Codesys v3.5.10.5.</p> <p>I'm using Gateway-1 which is configured to use "IP-Address: localhost" and "Port: 1217". Rather than scanning the network for devices, I enter the IP Address of the device, codesys returns a "No Device is repsonding..." message. See attached.</p> <p>I'm wondering if the IP-Address used Gateway-1 should be "localhost" or the WAN/LAN IP of the eWon?</p> <p>Thanks for the help</p> <p>MC</p></div>

2020-02-27T13:54:40.397000Z2020-02-27T13:54:40.397000ZGPezzolatohttps://forge.codesys.com/u/gpezzolato/https://forge.codesys.com1e46b8235cf196faa7f74a79f8c9ea1279aa441d

<div class="markdown_content"><blockquote> <p><strong>TimvH hat geschrieben:</strong><br/> Don't use the "Scan for devices", because you have probably created a VPN tunnel and this doesn't work.<br/> You have to use TCP/IP communication, therefore just enter the IP address of your CODESYS Controller in your communication settings dialog. Then it will try to connect by TCP/IP with the controller.</p> </blockquote> <p>Hello, I'm new in this forum and I'm a new user of the codesys 3.5.<br/> Last week I installed the version 3.5 SP14 Patch 2.<br/> I have the same problem with eWON Cosy, but probably I'm not setting the right parameters/address. How can I connect without the "scan for devices" ? <br/> I can only connect to the device directly (ethernet cable from pc to device) and with Gateway "localhost". <br/> Thank you</p></div>

2020-02-27T13:54:40.187000Z2020-02-27T13:54:40.187000ZAnonymoushttps://forge.codesys.com/u/*anonymous/https://forge.codesys.coma19fe98868a8be49f3a01f96a759c209c8eaa1fe

<div class="markdown_content"><p><em>Originally created by:</em> ph0010421</p> <p>Thank you, too.</p></div>

2020-02-27T13:54:39.497000Z2020-02-27T13:54:39.497000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.comb076b4a016e581dd9685ca1ea53b66e84a43ecd8

<div class="markdown_content"><p>Hi,<br/> there is a known error with current Gateway ( you need to use as a workaround &lt;SP10 CODESYS Gateway - will be fixed to 3.5SP12)</p> <p>BR<br/> Edwin</p></div>

2020-02-27T13:54:39.238000Z2020-02-27T13:54:39.238000ZAnonymoushttps://forge.codesys.com/u/*anonymous/https://forge.codesys.com7c3bc62d63cfa07c6c80470687b10639c110631f

<div class="markdown_content"><p><em>Originally created by:</em> ph0010421</p> <p>Thank you.</p></div>

2020-02-27T13:54:39.003000Z2020-02-27T13:54:39.003000Ztimvhhttps://forge.codesys.com/u/timvh/https://forge.codesys.comfaf180ef9916d7570a1410f40d043eb1c87bd7dd

<div class="markdown_content"><p>Don't use the "Scan for devices", because you have probably created a VPN tunnel and this doesn't work.<br/> You have to use TCP/IP communication, therefore just enter the IP address of your CODESYS Controller in your communication settings dialog. Then it will try to connect by TCP/IP with the controller.</p></div>

2020-02-27T13:54:38.808000Z2020-02-27T13:54:38.808000ZAnonymoushttps://forge.codesys.com/u/*anonymous/https://forge.codesys.com816b1e821f39cb6a08051ae4343fda342ee57cae

<div class="markdown_content"><p><em>Originally created by:</em> ph0010421</p> <p>Hello<br/> I'm having problems connecting to my Codesys PLC through an Ewon Cosy. I can see other parts of the target (it's an HMI/FTP server aswell).<br/> Is there an option I need to set?<br/> thanks</p></div>