https://forge.codesys.com/forge/talk/Engineering/thread/1dc433661a/2021-01-15T08:28:11.465000ZRecent posts to profinet communication2021-01-15T08:28:11.465000Z2021-01-15T08:28:11.465000Zgattohttps://forge.codesys.com/u/gatto/https://forge.codesys.comc7bd84e800b56f858648daebe75d689814d6771e

<div class="markdown_content"><p>ok, you are right.<br/> Just PN controller.<br/> My regards.</p></div>

2021-01-14T16:40:32.606000Z2021-01-14T16:40:32.606000Zlorbedhttps://forge.codesys.com/u/lorbed/https://forge.codesys.comac5c6d87119f6477a92860ea4b47fd3b316bd9d9

<div class="markdown_content"><p>Hi gatto,</p> <p>I don't know if it's your case, but I think that Exor HMI can only be used like PROFINET MASTER and not as PROFINET Slave.</p></div>

2021-01-14T15:02:56.232000Z2021-01-14T15:02:56.232000Zgattohttps://forge.codesys.com/u/gatto/https://forge.codesys.comb40955c4dfd6f9ce9340ee6a2ef7920e4976b12d

<div class="markdown_content"><p>Hi, codesys users.<br/> I am doing some tests here in the office to connect a siemens plc and a device codesys.<br/> I am using an exor hmi with softplc codesys 3.5.14 patch4.<br/> I entered a codesys profinet device.<br/> I exported the device and imported correctly in Tia-portal v15.<br/> In the siemens hardware configuration I inserted the same 2 input and output cards that I inserted in codesys (see images)<br/> I'm doing some tests and I haven't entered the license but I use it in demo for 2 hours.<br/> Codesys side seems to work in diagnosis.<br/> Siemens side when i scan the network i see the plc and the profinet codesys device correctly with ip and exact name.<br/> But going online with Tia-portal I see that the profinet device is in error (unreachable).<br/> Attached are some images and logs.<br/> Can you help me ?</p></div>