https://forge.codesys.com/forge/talk/Engineering/thread/35abba97b5/2020-02-27T14:17:07.916000ZRecent posts to PFC200 - 8207 /IP Route and Port Forwarding via eCockpit2020-02-27T14:17:07.916000Z2020-02-27T14:17:07.916000Zasnikhttps://forge.codesys.com/u/asnik/https://forge.codesys.com761a98ceb57d1327faa99004878e36710809c425

<div class="markdown_content"><p>With e!Runtime I used 11740 for remote access. 6626 is for IOCheck software as far as i know.</p></div>

2020-02-27T14:17:06.819000Z2020-02-27T14:17:06.819000Zrhosseinihttps://forge.codesys.com/u/rhosseini/https://forge.codesys.comef8cd25012316506505d33f257d342c6da5b80b7

<div class="markdown_content"><p>Hello,</p> <p>I have a <strong>PFC200 (750-8207) with 3G</strong> and would like to reach this controller for maintenance and reprogramming work via the cell phone connection. I want to create an IP table on the 8207 so that I could remotely revise my program through eCockpit. I would know which eCockpit ports are important for port forwarding? I read the manual: (11740: Codesys Port, 6626 WAGO Connection).<br/> For remote access, I first send an SMS with my cell phone to the controller, which then replies with an SMS that contains the current IP address. In Codesys V2 I use the current IP address + port.<br/> I can revise the program based on my IP table. (See Attachment)</p> <p>in Codesys V2 works without problems. But in eCockpit you cannot enter port. I can only enter an IP address in the fields and can not connect through <strong>PFC200 (750-8207) with 3G</strong> to other PLC (the 750-8207 can be connected)</p> <p>Thank you in advance for your efforts and I look forward to your feedback.</p> <p><img alt="IMG: CodesysV2.png" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=5131"/></p> <p><img alt="IMG: eCockpit.JPG" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=5132"/></p></div>