Codesys CSV file export

2020-02-27T13:49:08.220000Z

I managed to get it to work perfectly based on your code.
Thanks a lot for your help.
Cheers,
CanBohr

Codesys CSV file export

2020-02-27T13:49:08.131000Z

Thanks for your hint and effort.
I will try it and let you know the result.
Cheers,
CanBohr

Codesys CSV file export

2020-02-27T13:49:07.979000Z

Opening and closing a file is asynchronous in most systems, meaning that it will need several cpu cycles to process (on fast cycle tasks).
Using CAA.File may help sequencing correctly (with xDone/xError).

Your code is closing twice the same file (bad placed end_if ?).

purposal of nicer sequencing that may fit asynchronous writing (not tested, need completion on error handling):

IF WriteToFile THEN
   CASE FileWriteStep OF
      0: // Open the file
         FilePathAndName:=Concat(PLC_PRG.sFilePathData,PLC_PRG.sFileNameData);
         handleData := SysFileOpen(szFile:= FilePathAndName, SysFile.AM_APPEND_PLUS , ADR( SysFileOpenResult) );  
         IF handleData <> RTS_INVALID_HANDLE AND SysFileOpenResult = CmpErrors.Errors.ERR_OK THEN
            FileWriteStep := 1;
         ELSE
            FileWriteStep := 3; // Throw error
         END_IF
      1: // Write data
         SysFileWritenBytes := SysFileWrite(hFile:= handleData, pbyBuffer:= ADR(resultdata_csv), ulSize:=pEnd - ADR(resultdata_csv) , pResult:=ADR(SysFileWriteResult) );
         IF SysFileWritenBytes <> 0 AND SysFileWriteResult = CmpErrors.Errors.ERR_OK THEN
            FileWriteStep := 2;
         ELSE
            FileWriteStep := 4;   // Throw error
         END_IF
      2: // Close file and end sequence
         SysFileCloseResult := SysFileClose(hFile:= handleData );
         IF SysFileCloseResult = CmpErrors.Errors.ERR_OK THEN
            WriteToFile := FALSE;
         ELSE
            FileWriteStep := 5; // Throw error
         END_IF
      ELSE // Do some error management here
        WriteToFile := FALSE;
   END_CASE;
ELSE
   FileWriteStep := 0;
END_IF

Edit: Slight syntax correction

Codesys CSV file export

2020-02-27T13:49:07.599000Z

I am doing the write process a bit different and I am using a FileOpenData flag to check if the file is already open.
So this might not be the problem.
Any other hints?

IF NOT FileOpenData THEN
   
   
   FilePathAndName:=Concat(PLC_PRG.sFilePathData,PLC_PRG.sFileNameData);
   
   handleData := SysFileOpen(szFile:= FilePathAndName, AM_APPEND_PLUS , ADR( rte) );      
         
   (* Write Datastring to file *)
   IF SysFileWrite(hFile:= handleData, pbyBuffer:= ADR(resultdata_csv), ulSize:=pEnd - ADR(resultdata_csv) , pResult:=ADR( rte) )= 0 THEN
      
      iERRORData := 92; (* Could not write to file *)
      sStatusData := 'Could not write file.';
      SysFileClose(hFile:= handleData ) ;
   
      IF FileOpenData THEN
         
         (* Close file *)
         IF SysFileClose(hFile:= handleData ) =0 THEN
               FileOpenData := FALSE;
               sStatusData := 'File Saved.';
               iERRORData := 91; (* Could not close file *)
               sStatusData := 'Could not close file.';
               xReadyForData:=FALSE;
         END_IF
      END_IF
   ELSE
      xWritingData:=FALSE;   
      xStartData := FALSE;
      xReadyForData:=TRUE;
         
   END_IF
END_IF

Codesys CSV file export

2020-02-27T13:49:07.497000Z

In this project, there is :

fopen(
   xExecute:= TRUE,

At the time you execute the file close, this may be a problem. Try to execute fopen only if your file hasn't been opened yet (xDone = false) and you want to write in it.

Codesys CSV file export

2020-02-27T13:49:07.404000Z

Hello Wollvieh,

Thanks a lot for your testfile. I am using it to write data into a csv-file.
It's working 1000 times.

But after 1000 write operations the systems (Codesys) exits and needs to be restarted.

Have you had this issue also? Do you have an explanation for it?

Cheers,
CanBohr

Codesys CSV file export

2020-02-27T13:49:07.314000Z

Hello rjafrate,
Yes, I think so but dont know how to deal with it. I waited till the time out and stopped running, still no file! I plan to try a new idea, OPC communication with matlab. Hope it will work.

rjafrate hat geschrieben:
After writing to the file you need to wait until the write operation is actually performed before closing the file. The SysFile lib you are using should tell how to examine error, status, etc

Codesys CSV file export

2020-02-27T13:49:07.223000Z

Hello wollvieh,
Thanks for your help. I have seen your program in another post. But maybe because the different patch, I can not run your program. I have no idea what is the problem. Seems like the program I found is right, but no file exported. I will try find out what is going on. Thanks again.

wollvieh hat geschrieben:
look at this sample program...
it writes 100 real values multiplied by 3600 rows (360000 values) in a csv file.
maybe it gives you an inspiration ?
I used he Codesys V3.5SP9Patch5 and the Codesys ControlWINV3 as runtime...
csv.JPG
test_csv.project
wollvieh.

Codesys CSV file export

2020-02-27T13:49:07.135000Z

After writing to the file you need to wait until the write operation is actually performed before closing the file. The SysFile lib you are using should tell how to examine error, status, etc

Codesys CSV file export

2020-02-27T13:49:07.045000Z

look at this sample program...

it writes 100 real values multiplied by 3600 rows (360000 values) in a csv file.
maybe it gives you an inspiration ?

I used he Codesys V3.5SP9Patch5 and the Codesys ControlWINV3 as runtime...

wollvieh.

test_csv.project [121.25 KiB]

Recent posts to Codesys CSV file export

Codesys CSV file export

Codesys CSV file export

Codesys CSV file export

Codesys CSV file export

Codesys CSV file export

Codesys CSV file export

Codesys CSV file export

Codesys CSV file export

Codesys CSV file export

Codesys CSV file export