https://forge.codesys.com/forge/talk/Engineering/thread/37f0c44366/2020-07-28T17:01:48.151000ZRecent posts to CODESYS 3.5.16 with NXHX90 (Hilscher GmbH)2020-07-28T17:01:48.151000Z2020-07-28T17:01:48.151000ZMorberishttps://forge.codesys.com/u/morberis/https://forge.codesys.com1fc182aaf854046897d7d4392f2cc8ea5bd20e51

<div class="markdown_content"><p>As far as I can see only Codesys 2.3 has official windows 7 support. </p></div>

2020-07-28T01:51:35.561000Z2020-07-28T01:51:35.561000Zap040https://forge.codesys.com/u/ap040/https://forge.codesys.combfac8e425d4176d87502ca4b7c04adc30dab1749

<div class="markdown_content"><p>Does any version of CODESYS tool available which is working on Windows 7?.</p></div>

2020-07-27T11:30:25.940000Z2020-07-27T11:30:25.940000Zap040https://forge.codesys.com/u/ap040/https://forge.codesys.comc9b2093f8fcf00f6b0606851284db567e5695978

<div class="markdown_content"><p>Solved error by not enabling the bus cycle option from PLC setting for the Gateway and now my netX90 is connected.</p></div>

2020-07-27T07:27:10.933000Z2020-07-27T07:27:10.933000Zap040https://forge.codesys.com/u/ap040/https://forge.codesys.com0ae5f6b24b18b82a769213dea9d4dba2dbd19819

<div class="markdown_content"><p>I have checked and getting some success to scan device without hanging problem to my PC.<br/> I got the some error code of "AR cmi timeout" same error log is attached.<br/> Can someone help with this?.</p></div>

2020-07-25T10:34:09.865000Z2020-07-25T10:34:09.865000Zap040https://forge.codesys.com/u/ap040/https://forge.codesys.comaced92d8f1075d52f6e21ccc866a2aaf20c07f44

<div class="markdown_content"><p>Thank you for your suggestion <a class="user-mention" href="/u/i-campbell/">@i-campbell</a>.<br/> I will read and try it.</p></div>

2020-07-25T06:21:35.323000Z2020-07-25T06:21:35.323000Zi-campbellhttps://forge.codesys.com/u/i-campbell/https://forge.codesys.com8b1dc35eadb7ca4c6a90015bc0435dc08b9e4cd0

<div class="markdown_content"><p>Read <a class="" href="https://help.codesys.com/webapp/_pnio_f_runtime_configuration;product=core_ProfinetIO_Configuration_Editor;version=3.5.16.0" rel="nofollow">this</a> page and its four sub-pages.</p> <p>There is a trick with the componentmanager section, the numbers must all be sequential and start from 1. Commented out lines don't count.</p> <p>When still not scanning look at the PLC logs (double click PLC device &gt; Logs) and Profinet Controller logs (double click PN controller device &gt; Log) </p></div>

2020-07-25T05:44:06.983000Z2020-07-25T05:44:06.983000Zap040https://forge.codesys.com/u/ap040/https://forge.codesys.comc94474e988913af8eab397053b5952885cc35a1f

<div class="markdown_content"><p>Thank you @Morberis.<br/> I mentioned performed steps as per my thought. Can somebody give further help?.<br/> As per the CODESYS "MY Question" help desk, it is possible to use PC as PN-Controller and we can directly use PN-Slave without any additional hardware in between as we use softPLC (CODESYS Control Win SL).</p></div>

2020-07-24T17:59:16.436000Z2020-07-24T17:59:16.436000ZMorberishttps://forge.codesys.com/u/morberis/https://forge.codesys.com7daf5b96987c635d70daacc2762169c4adf78b90

<div class="markdown_content"><p>You are correct, they don't have a specific forum for the NXHX-90.</p> <p>Unfortunately I do not have a profinet device to try things out with here. </p> <p>Looking in the help file I see that there is a variant device driver for Hilscher CIFX/Netx devices. So that would be a good point to check.</p> <p>Other than that I don't have any good advice for you other than to check this <a class="" href="https://help.codesys.com/webapp/_pnio_f_troubleshooting;product=core_ProfinetIO_Configuration_Editor;version=3.5.15.0" rel="nofollow">troubleshooting</a> page. I apologize for that. </p></div>

2020-07-24T06:28:10.467000Z2020-07-24T06:28:10.467000Zap040https://forge.codesys.com/u/ap040/https://forge.codesys.comd1ebae82334938ff538bcdaaa366121ddb78556e

<div class="markdown_content"><p>I have done some test.<br/> Tools-&gt; Device Repository-&gt; Install -&gt; My next90 GSDML file.<br/> Created new project with Codesys Control Win V3 x64.<br/> Scan network which shows my PC in the below of the Gateway tree.<br/> Selected my PC which shows Green symbol. Right click and add device-&gt; Ethernet.<br/> Click on Ethernet add device -&gt; PN Controller.<br/> Assign network adapter to Ethernet and adjust IP of PN controller. Login it will shows device connected. Then start the configuration and PN controller is showing unconnected symbol. </p> <p>I have done above steps, my PC is hanged with this.<br/> Can someone guide me?.</p></div>

2020-07-23T14:53:31.051000Z2020-07-23T14:53:31.051000Zap040https://forge.codesys.com/u/ap040/https://forge.codesys.com3c3cdfea1b1865844158502789e40a78bc56007a

<div class="markdown_content"><p>Yes, I want to establish profinet communication between a codesys softplc running on my computer and the devkit.<br/> For your information there is no forum for the NXHX-90 dev kit.</p> <p>@Morberis, can you help me to do it?. Which steps are used for the configuration?.</p></div>