https://forge.codesys.com/forge/talk/Engineering/thread/38d74d70f4/2020-02-27T14:09:08.776000ZRecent posts to Beckhoff DeviceNet Slave EL6752-0010 via Ethercat Coupler EK11002020-02-27T14:09:08.776000Z2020-02-27T14:09:08.776000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com3925a1b7c27c1e8fbe264756bc75f468e423c135

<div class="markdown_content"><p>Hello Thomas,<br/> hard to say, the device net support in CODESYS is obsolete (no or to few customers ask for it)<br/> Therefore the EL6752 is not supported.</p> <p>Grüße<br/> Edwin</p></div>

2020-02-27T14:09:08.354000Z2020-02-27T14:09:08.354000ZAnonymoushttps://forge.codesys.com/u/*anonymous/https://forge.codesys.com09643a5e6e65dbf9ecd970a2aa484c0ef0e7ca49

<div class="markdown_content"><p><em>Originally created by:</em> Thomas Wiesenthal</p> <p>Hello.<br/> I want to connect the Beckhoff DeviceNet Slave EL6752-0010 via an Ethercat coupler EK1100 to the Ethercat master of Codesys V3.<br/> I get the ethercat communication running, but the configuration of the DeviceNet via Ethercat doesn't seem to work properly.<br/> The DeviceNet master isn't able to start the communication (device deactivated).<br/> Via Twincat the configuration of the DeviceNet works. So the hardware setup is correct.<br/> Can someone provide a demo of such a configuration or some more detailed configuration instructions.<br/> A configuration with a few bytes in- and output in polling mode would be sufficient.<br/> Regards<br/> Thomas</p></div>