https://forge.codesys.com/forge/talk/Engineering/thread/3e0b112e7c/2020-02-27T13:53:09.757000ZRecent posts to Multi network project2020-02-27T13:53:09.757000Z2020-02-27T13:53:09.757000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com72d14cb612166dd39fb6c5c074becef49fd5ecce

<div class="markdown_content"><p>hm you will have a rte which contains always both cards the netx for Profinet and the Nic for ethercat right?<br/> You want to have a full configured iec application which contains ethercat and profinet?<br/> Then no matter if ethercat or profinet is physically connected the same project should work for both configurations?<br/> One proposal could be configure all ethercat slaves as optional then the config with profinet should work.<br/> for dynamic profinet configurations are there any suggestions from other users?</p></div>

2020-02-27T13:53:09.578000Z2020-02-27T13:53:09.578000Zdavolmhttps://forge.codesys.com/u/davolm/https://forge.codesys.com84a52d40a83ed86cf971aa26c02042e909c5ef96

<div class="markdown_content"><p>Hello,</p> <p>I need to create a Codesys v. 3.4.1 (RTE target) project with Ethercat and Profinet network. The two networks don't work together but one at a time depending from the customer machine configuration, also the configuration of the slaves can change. The selection of the settings should be done in run time and not in development.</p> <p>Anyone can suggest me how to set this kind of project?</p> <p>Thanks</p></div>