Recent posts to IFM Controller Connection Issuehttps://forge.codesys.com/forge/talk/Engineering/thread/433862227f/2025-05-29T15:08:29.491000ZRecent posts to IFM Controller Connection IssueIFM Controller Connection Issue2025-05-29T15:08:29.491000Z2025-05-29T15:08:29.491000Zedson-buenohttps://forge.codesys.com/u/edson-bueno/https://forge.codesys.com0ed98345bb74632b3193e1b79e1f56329a32f4c8<div class="markdown_content"><p>Hi,</p>
<p>Could you please send an print of your ethernet adapter info?</p>
<p>Ip addr<br/>
Subnet Mask <br/>
Default Gateway</p>
<p>Also, check if the gateway service is active in your windows.</p>
<p>Win+R > services.msc > </p>
<p>Look in the list CODESYS Control Win V3 x64 Gateway OR CODESYS Gateway V3</p>
<p>Hook up the M12 code D into the ETH port, supply the controller, it should apperars to you.</p>
<p>Make sure when you try to connect with the controller, the target of your project has to match with the controller. Otherwise, click on the device in the devices tree > Communications Settings tab > Device > Options > And disable "Filter Network Scans by Target ID".</p>
<p>Good luck.</p></div>IFM Controller Connection Issue2025-05-29T08:33:47.346000Z2025-05-29T08:33:47.346000ZDave_Thttps://forge.codesys.com/u/nz-dave/https://forge.codesys.comd794ebb1899dfdfb9df1eeb19503f021413b9935<div class="markdown_content"><p>So you don't see the device when scanning for devices?<br/>
Im not familiar with that device. how dose it connect? serial/ethernet? </p></div>IFM Controller Connection Issue2025-05-22T13:54:42.223000Z2025-05-22T13:54:42.223000Zjanphttps://forge.codesys.com/u/janp/https://forge.codesys.comab319988d0d4ac1da392b2ef8c84be19c31bb86c<div class="markdown_content"><p>Hi everyone,</p>
<p>I’m using an IFM ecomatBasic CR413S controller and having trouble connecting it to CODESYS 3.5. I have CODESYS SP18 installed, as recommended in the manual, and I’ve tried different patches. I’ve also installed all the packages provided on the IFM website for this controller.</p>
<p>I can successfully connect to the ecomatBasic template, but I’m unable to connect when using the CR413S-specific template that includes all the inputs and outputs.</p>
<p>Has anyone encountered this issue or knows a solution?</p>
<p>Best regards,<br/>
Jan</p></div>