TCP/IP Client and connection handle issue

2020-02-27T13:47:36.691000Z

Hello Robinston,

I tried your code (and I ran TCPServer always, as it was recommended, not only in the first run), but in my TCPWrite FB, I get "Invalid Handle", even if I try the other recommended issues, posted by TimvH.

Did you only deleted the IF bfirst THEN-Loop - or did you some other changes in your code until it worked?

Thanks in advance for your kind help.

Best Regards
Ruwen

TCP/IP Client and connection handle issue

2020-02-27T13:47:36.653000Z

I would recommend using the OsCat Network Library it has been tested and validated. You can use the IP_CONTROL FB's to implement you own TCP SERVER.

You have to be signed in to download. This has been updated for CoDeSys V3.

http://www.oscat.de/community/index.php ... 784.0.html m

TCP/IP Client and connection handle issue

2020-02-27T13:47:36.616000Z

Hey TimvH,

"Always call the TCPServer FB (not just the first scan) with xEnable TRUE" helped me out!

Thank you for your help!

TCP/IP Client and connection handle issue

2020-02-27T13:47:36.570000Z

I'm not 100% sure, but here some things that might help:
- Always call the TCPServer FB (not just the first scan) with xEnable TRUE.
- Enable the TCPConnection when the TCPServer handle is not invalid or 0.
- Execute the TCPWrite FB when the TCPConnection is Active (not when it is done)
- An Execute input of the FB is a trigger to start it, therefore the data is only send once in your application. Replace the TRUE for a puls generator or something similar.

TCP/IP Client and connection handle issue

2020-02-27T13:47:36.345000Z

Hello,

I am currently working on a TCP/IP implementation in CoDeSys V3, whereas the IEC61131-3 program has to be the server. For whatever reason, it is not possible to receive any data from the point of view of TCP client, even though a working connection could be established.
I am using the NetBaseServices.

Please refer to the following code:

---HEADER---
PROGRAM TCP_Client
VAR 
   bFirst: BOOL := TRUE;
   My_Data: ARRAY[0..4] OF BYTE := [0,1,2,3,4];
 
   NBS_IP_Adress : NBS.IP_ADDR; 
   
   TCPClient : NBS.TCP_Client;
   TCPClient_xDone : BOOL;
   TCPClient_xBusy : BOOL;
   TCPClient_eError : NBS.ERROR;
   TCPClient_xActive : BOOL;
   TCPClient_hConn : NBS.CAA.HANDLE;
   
   TCPServer : NBS.TCP_Server;
   TCPServer_xDone : BOOL;
   TCPServer_xBusy : BOOL;
   TCPServer_eError : NBS.ERROR;
   TCPServer_xError : BOOL;
   TCPServer_hServer : NBS.CAA.HANDLE;
   
   TCPConnection : NBS.TCP_Connection;
   TCPConnection_xDone: BOOL;
   TCPConnection_eError : NBS.ERROR;
   TCPConnection_xActive : BOOL;
   
   TCPWrite : NBS.TCP_Write;
   TCPWrite_xDone : BOOL;
   TCPWrite_xBusy : BOOL;
   TCPWrite_eError : NBS.ERROR;
   TCPWrite_xError : BOOL;
END_VAR 
---PROGRAM---
IF bFirst THEN 
   bFirst := FALSE;
   
   // CoDeSys Automation Alliance (CAA) Interfaces - NetBaseServices (NBS) 
   NBS_IP_Adress.sAddr := '192.168.178.39';
   TCPServer(
      xEnable := TRUE,
      ipAddr := NBS_IP_Adress,
      uiPort := 61002,
      xDone => TCPServer_xDone,
      xBusy => TCPServer_xBusy,
      eError => TCPServer_eError,
      xError => TCPServer_xError,
   );
END_IF 
My_Data[0] := My_Data[0]+1; 
My_Data[1] := My_Data[1]+1; 
My_Data[2] := My_Data[2]+1; 
My_Data[3] := My_Data[3]+1; 
My_Data[4] := My_Data[4]+1; 
TCPConnection(
   xEnable := TRUE,
   hServer := TCPServer.hServer,
   xDone => TCPConnection_xDone,
   eError => TCPConnection_eError,
   xActive => TCPConnection_xActive      
);
IF TCPConnection.xDone THEN
   TCPWrite(
      xExecute := TRUE,
      hConnection := TCPConnection.hConnection,
      pData := ADR(My_Data),
      szSize := SIZEOF(My_Data),
      xDone => TCPWrite_xDone,
      xBusy => TCPWrite_xBusy,
      xError => TCPWrite_xError,
      eError => TCPWrite_eError
   );   
END_IF

Do you have an idea what is wrong with my implementation?
Thanks in advance for your kind support.

Regards,
Robert

Recent posts to TCP/IP Client and connection handle issue

TCP/IP Client and connection handle issue

TCP/IP Client and connection handle issue

TCP/IP Client and connection handle issue

TCP/IP Client and connection handle issue

TCP/IP Client and connection handle issue