Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Could not connect to controller

2018-08-01
2022-01-13
  • tjarcoboerkoel - 2018-08-01

    Dear readers,

    I'm new to codesys V3 and structuredtext programming. My background is embedded realtime systems using C(++),
    I'm running a TM251MESE controller from Schneider and use the SoMachine 4 development environment (codesys 3).

    I'm having difficulties connecting to the controller. The controller is available in the controller selection but when connecting (login) I get a error (see attachment).

    Could someone help me out here?

    Best regards

    PS: The controller is in "RUN" state (physical switch on the controller).

    IMG: TM251MESE.png

     
  • tjarcoboerkoel - 2018-08-07

    Hi All,

    Thanks to Schneider Electric we found that the gateway server was not configured properly.
    In the "gateway management console" application we needed to (re-)configure the interfaces.
    Was needed after a change in the network IP range.

    Now we're able to connect.

    Bets regards

    IMG: gateway_management_console.png

     
  • pooja - 2022-01-13

    Hi,

    I am also having the same issue i.e. Not able to login to the controller but I am not able to edit gateway Management Console - Gateway Configuration. Some of the screenshots from my program.

     

Log in to post a comment.