https://forge.codesys.com/forge/talk/Engineering/thread/5f7d8c96e7/2020-02-27T14:09:37.219000ZRecent posts to Fieldbus testing Codesys (PLC <-fieldbus-> Raspberry)2020-02-27T14:09:37.219000Z2020-02-27T14:09:37.219000Zjiri.salhttps://forge.codesys.com/u/jiri-sal/https://forge.codesys.com78a226933b9306f4550c1219b88e5fa4313ed00f

<div class="markdown_content"><p>Yes, I did add those lines, and firewall is off, I think my Raspi did something because it started to create virtual interfaces for Ethernet, for my testing purposes, I started Codesys on another PC and didn't use Raspberry in the end. <br/> Communication went fine, now I will proceed to EtherCAT.</p> <p>Thanks again for answers.</p></div>

2020-02-27T14:09:36.883000Z2020-02-27T14:09:36.883000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com3d01468c7fb6ad09349c015f36837f073f329e47

<div class="markdown_content"><p>Hi,<br/> did you add on pn device side (Pi)<br/> /etc/CODESYSControl_User.cfg</p> <p><span>[SysSocket]</span><br/> Adapter.0.Name="eth1"<br/> Adapter.0.EnableSetIpAndMask=1</p> <p>'eth1' or 'eth0'</p> <p>and check if on Windows side the firewall is diabled.</p> <p>BR<br/> Edwin</p></div>

2020-02-27T14:09:36.560000Z2020-02-27T14:09:36.560000Zjiri.salhttps://forge.codesys.com/u/jiri-sal/https://forge.codesys.comd94a54c642e024f134debbea9ba602f5adf6eb0a

<div class="markdown_content"><p>Hi, thanks for your answer, I looked at the project you provided, and it seems I have everything configured correctly,<br/> I had changed CODESYSControl_User.cfg on Raspberry and as I said I have winpcap installed and running.</p> <p>But it seems I cant get my slave to run, I dont know if there is problem with Ethernet adapter(I havent add sysEthernet component to raspberry tho, i dont know if I have to). My profinet slave device cannot get Ethernet information, it seems. But Slave gets 0 errors in Log, its pretty frustrating already. I am attaching screen of my project.</p> <p>Thanks for your help.</p> <p><img alt="IMG: ProfiNet.project_ " rel="nofollow" src="https://forum.codesys.com//download/file.php?id=4613"/></p></div>

2020-02-27T14:09:36.229000Z2020-02-27T14:09:36.229000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com0f26416da356cdb7a7a8d929629331dabcc54e12

<div class="markdown_content"><p>Hi,<br/> EtherCAT is not possible without additional hardware. <br/> You need a gateway device to connect the two masters ( Control Win on your PC and the Raspberry Pi)<br/> -&gt;EL6692 device</p> <p>Profinetnet is possible without additional hardware.<br/> Here is an example project including 2 PI's as plc's. ( one is Profinet Controller the other Profinet Device)<br/> l <a class="" href="https://forum.codesys.com/viewtopic.php?f=23&amp;t=6247&amp;x=16870&amp;p=16870&amp;lan=en" rel="nofollow">viewtopic.php?f=23&amp;t=6247&amp;p=16870#p16870</a> l </p> <p>BR<br/> Edwin</p></div>

2020-02-27T14:09:35.035000Z2020-02-27T14:09:35.035000Zjiri.salhttps://forge.codesys.com/u/jiri-sal/https://forge.codesys.com56edd10b92b382097d495fbd585399185d0b4a3b

<div class="markdown_content"><p>Hi, I am trying to make running communication via ModbusTCP, EtherCAT and ProfiNet on 2 plcs, I have one vitual on my PC running and a second one on Raspberry pi with Codesys runtime, I was able to make Modbus run a simple communication but I am struggling with EtherCAT and ProfiNet. Both PLCs are in one project.<br/> On ProfiNet I get a ErrorFindEthernet message, I even tried installing winpcap and I added "sysEthernet" to configuration file.<br/> On EtherCAT I am clueless I dont even know if I have the right devices connected.</p> <p>Thanks for your time and I apreciate your help.</p> <p><a class="" href="https://forum.codesys.com//download/file.php?id=4590" rel="nofollow">ModbusCom.project <span><span>[301.97 KiB]</span></span></a></p></div>