https://forge.codesys.com/forge/talk/Engineering/thread/609f684385/2022-12-25T09:58:26.955000ZRecent posts to Codesys V3.5.18 and KNX2022-12-25T09:58:26.955000Z2022-12-25T09:58:26.955000ZSandrohttps://forge.codesys.com/u/sandro/https://forge.codesys.comf59cbe421de196af9e743de0fddf35ae5991e18e

<div class="markdown_content"><p>Hi everyone,<br/> since I haven't received information from anyone, if it can be useful to someone else, after some tests I discovered that the system can only work using an IP-ROUTER (I used an "IP Router SCN-IP100.03" from MDT).</p></div>

2022-07-04T15:35:41.612000Z2022-07-04T15:35:41.612000ZSandrohttps://forge.codesys.com/u/sandro/https://forge.codesys.comfa0afa0e9ccd76a54e80593badfd42ea60dfeb40

<div class="markdown_content"><p>Can anyone answer me?<br/> Thank you</p></div>

2022-06-17T13:01:40.189000Z2022-06-17T13:01:40.189000ZSandrohttps://forge.codesys.com/u/sandro/https://forge.codesys.comd9d15bb3fb94826228c20d804a61c4ec9c0261b9

<div class="markdown_content"><p>Hi all,<br/> I am using Codesys 3.5 SP18 with:<br/> - CODESYS Control for Raspberry Pi SL (license in USB KEY)<br/> - CODESYS KNX SL (license in USB KEY<br/> I have configured both Codesys and ETS but it is not communicating.<br/> On the KNX side I am using the "IP Interface SCN-IP000.03" (MDT) and I think this is the problem (in other topic Edwin recommend an IP ROUTER).<br/> So I should replace the interface with "IP Router SCN-IP100.03" (MDT).<br/> Do you think this could be the solution?<br/> In the windows KNX I/O Mapping the variable Program LED Status and Program Button are BOOL but the variable are %IB0 and %QB0. Shouldn't it be% IX0.0 and &amp; QX0.0?<br/> I am attaching some screenshots.<br/> Thank you</p></div>