<?xml version="1.0" encoding="utf-8"?>
<feed xml:lang="en" xmlns="http://www.w3.org/2005/Atom"><title>Recent posts to IFM-Sensor ADC READ</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/623ab4f080/" rel="alternate"/><link href="https://forge.codesys.com/forge/talk/Engineering/thread/623ab4f080/feed.atom" rel="self"/><id>https://forge.codesys.com/forge/talk/Engineering/thread/623ab4f080/</id><updated>2024-08-24T21:02:36.194000Z</updated><subtitle>Recent posts to IFM-Sensor ADC READ</subtitle><entry><title>IFM-Sensor ADC READ</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/623ab4f080/?limit=25#304f" rel="alternate"/><published>2024-08-24T21:02:36.194000Z</published><updated>2024-08-24T21:02:36.194000Z</updated><author><name>IonCoder</name><uri>https://forge.codesys.com/u/lukebouchard/</uri></author><id>https://forge.codesys.com4a250ab6a34351b7a6bc66d8f82d06898663fc19</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;Get a different sensor that is 0-10V and 0-350 Bar. There is nothing you can reasonably do to boost the range of the sensor, and the PLC will only ever be 0-10V. Take away is to always be careful to match the sensor and PLC input ranges in the future.&lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>IFM-Sensor ADC READ</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/623ab4f080/?limit=25#0f11" rel="alternate"/><published>2024-08-23T13:53:43.642000Z</published><updated>2024-08-23T13:53:43.642000Z</updated><author><name>taqamert</name><uri>https://forge.codesys.com/u/taqamert/</uri></author><id>https://forge.codesys.comce3831f6ef92d444543af4f1fe89f5cd0939bf75</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;I have a pressure sensor that measures 0-600 bar and outputs a 0-5V signal, but my PLC reads analog inputs in the 0-10V range and displays a value of 1024 when 10V is applied. In this case, when the sensor outputs 5V at 600 bar, the PLC shows a value of 512. My working range is 0-350 bar, which means the PLC only uses 298 bits in this range, significantly reducing the resolution. What can I do to achieve better resolution within the 0-350 bar range?&lt;/p&gt;&lt;/div&gt;</summary></entry></feed>