Recent posts to How to use MCP3008 with codesys and raspberry pi ? (including GPIO setup)https://forge.codesys.com/forge/talk/Engineering/thread/633542940e/2020-02-27T13:52:25.689000ZRecent posts to How to use MCP3008 with codesys and raspberry pi ? (including GPIO setup)How to use MCP3008 with codesys and raspberry pi ? (including GPIO setup)2020-02-27T13:52:25.689000Z2020-02-27T13:52:25.689000ZAnonymoushttps://forge.codesys.com/u/*anonymous/https://forge.codesys.comcee256db76e8980cfcc572e731875c78fcdf5880<div class="markdown_content"><p><em>Originally created by:</em> kjsys1202@naver.com</p>
<p>Thank you for your reply.<br/>
However, I encountered another problem.<br/>
I created a new project by looking at the 'MCP3008Temp' example file. And the same code and the same settings, despite the 'C0032' error code came out.<br/>
I want to convert type, but I do not know what to do.<br/>
I'll wait for a good reply.</p>
<p><img alt="IMG: 2.PNG" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=4610"/></p>
<p><img alt="IMG: 1.PNG" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=4609"/></p></div>How to use MCP3008 with codesys and raspberry pi ? (including GPIO setup)2020-02-27T13:52:25.527000Z2020-02-27T13:52:25.527000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.comfadc5f35f28eda7cfd14e957694081b8228def0e<div class="markdown_content"><p>hi,<br/>
maybe attached first steps documentation should point you in the right direction.</p>
<p>A known issue is at the moment:<br/>
You need to reduce the SPI mas speed :</p>
<p>BR<br/>
Edwin</p>
<p><img alt="IMG: SPIMaxSpeed.png" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=4608"/></p>
<p><a class="" href="https://forum.codesys.com//download/file.php?id=4607" rel="nofollow">RaspberryPI_CodesysV3_FirstSteps_EN.pdf <span><span>[885.7 KiB]</span></span></a></p></div>How to use MCP3008 with codesys and raspberry pi ? (including GPIO setup)2020-02-27T13:52:25.361000Z2020-02-27T13:52:25.361000ZAnonymoushttps://forge.codesys.com/u/*anonymous/https://forge.codesys.com14391c431a9f6495289d259ee58c7bcdfc17a0f6<div class="markdown_content"><p><em>Originally created by:</em> kjsys1202@naver.com</p>
<p>I do not speak English well, so I ask a Google translator. Even if the grammar is not valid, please understand.</p>
<p>I would like to receive data values via codesys via raspberry pi and MCP3008.</p>
<p>As far as I know, I get data values through SPI communication, but there are no GPIOs 8,9,10,11 in codesys.<br/>
Can you tell me how to add a GPIO or how to make it work differently?</p>
<p>And I am going to use the codesys example 'MCP3008Temperaturae', but I do not know how to set GPIO Parameters and SPIO I / O Mapping. I want you to know this too.</p>
<p>I'll be waiting for a good answer.</p>
<p><img alt="IMG: 캡처2.PNG" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=4605"/></p></div>