Recent posts to SP13 674bit freezing (not responding) in tab changehttps://forge.codesys.com/forge/talk/Engineering/thread/6654d400cc/2020-02-27T14:11:26.626000ZRecent posts to SP13 674bit freezing (not responding) in tab changeSP13 674bit freezing (not responding) in tab change2020-02-27T14:11:26.626000Z2020-02-27T14:11:26.626000Zaliazzzhttps://forge.codesys.com/u/aliazzz/https://forge.codesys.com7d61eb6d3d8e5d8394e11ff2b9745cfbb4c97d09<div class="markdown_content"><p>Probably something related with your OS / PC setup ?<br/>
I run a virtual PC with CODESYS SP13 x64 & x86 in tandem which works like a charm.</p></div>SP13 674bit freezing (not responding) in tab change2020-02-27T14:11:26.243000Z2020-02-27T14:11:26.243000Zstefan.fhttps://forge.codesys.com/u/stefan-f/https://forge.codesys.com2a64a8ce862397415a550f87ffab3bdd426f6d25<div class="markdown_content"><p>Hi all,</p>
<p>since I installed the new SP13 x64 the IDE is the most of the time in (not responding) mode (probably somehow related to right-click???!)</p>
<p>For example:<br/>
- I create a new standard Project, select the Device, click on ok,<br/>
- The project structure will be created in 20-30s,<br/>
- right click on Application to create a new POU (Programm,ST), OK --> directly followed by a right-click on application again --> not responding for ca. 8s until the menu comes up. CPU load of Codesys increases up to 17% (440MB RAM), in idle 1,7%.<br/>
and so on...</p>
<p>adding a EtherCat Master takes roughly 1 Minute...</p>
<p>It feels like all right-clicks on a new point (Device, Applikation, E/A mapping) are making some stuff in the background...</p>
<p>I compared it with the SP12.40. The CPU is going for the same procedure as before only up to 4% (RAM 440MB very similar), but right-click is working directly...</p>
<p>I'm using W10x64, i7-6820HQ @ 2,7Ghz, 16GB RAM.</p>
<p>Is there a setting for this? It's really annoying or I just use the SP12.4 until the next release...</p>
<p>Thanks,<br/>
Stefan</p></div>