https://forge.codesys.com/forge/talk/Engineering/thread/70520a1a8e/2023-04-04T19:52:01.248000ZRecent posts to Operation: CmpID = 0x00000019, ID = 0x1, enable = 1, alive = 0, timeout = 10000 [FAILED]2023-04-04T19:52:01.248000Z2023-04-04T19:52:01.248000Zfawvromanshttps://forge.codesys.com/u/fawvromans/https://forge.codesys.comff49dce716f6afcc42a6900f28bf2e0b3172827d

<div class="markdown_content"><p>Hi, thanks for your response.<br/> I will try and give as much information as I can think of.<br/> While doing this I wil repeat the test assignment.</p> <p>So, I am using the following software:<br/> - Codesys V3.5 SP19<br/> - CODESYS OPC DA Server SL-demo<br/> - Matrikon OPC Explorer (v 5.4.0.0, I think)</p> <p>I am doing the following (I wil also provide some screenshots)<br/> - Create a new (standard project, Device: Codesys control win V3 x64, PLC_PRG:FBD)<br/> - Create a program and generate the code<br/> - Start Codesys control win V3 x64<br/> - Scan the network to create a path to the controller (from this point on it starts giving this error)<br/> - Add a symbol configuration and press build<br/> - Select the variables I wish to export and build again<br/> - Login<br/> - Start the OPC configurator (make sure my device adres is correct)<br/> - Start Matrikon OPC<br/> - Login to Codesys.OPC.DA<br/> - Aaand somehow the variables are showing up now.... Haven't got a clue what is different this time.. I have litterely done this about 10x now. Including together with my teacher and it has not worked a single time..<br/> Also the connection to Reliance, which I use as a visualization tool, works.</p> <p>The error still shows though..<br/> Can this cause a problem in the future?</p></div>

2023-04-04T19:51:55.348000Z2023-04-04T19:51:55.348000Zfawvromanshttps://forge.codesys.com/u/fawvromans/https://forge.codesys.com334b242aa9016170c61bd7d3209381c98f55f45f

<div class="markdown_content"><p>Hi, thanks for your response.<br/> I will try and give as much information as I can think of.<br/> While doing this I wil repeat the test assignment.</p> <p>So, I am using the following software:<br/> - Codesys V3.5 SP19<br/> - CODESYS OPC DA Server SL-demo<br/> - Matrikon OPC Explorer (v 5.4.0.0, I think)</p> <p>I am doing the following (I wil also provide some screenshots)<br/> - Create a new (standard project, Device: Codesys control win V3 x64, PLC_PRG:FBD)<br/> - Create a program and generate the code<br/> - Start Codesys control win V3 x64<br/> - Scan the network to create a path to the controller (from this point on it starts giving this error)<br/> - Add a symbol configuration and press build<br/> - Select the variables I wish to export and build again<br/> - Login<br/> - Start the OPC configurator (make sure my device adres is correct)<br/> - Start Matrikon OPC<br/> - Login to Codesys.OPC.DA<br/> - Aaand somehow the variables are showing up now.... Haven't got a clue what is different this time.. I have litterely done this about 10x now. Including together with my teacher and it has not worked a single time..<br/> Also the connection to Reliance, which I use as a visualization tool, works.</p> <p>The error still shows though..<br/> Can this cause a problem in the future?</p></div>

2023-03-31T15:21:35.294000Z2023-03-31T15:21:35.294000Zsnhattonhttps://forge.codesys.com/u/snhatton/https://forge.codesys.comc5547914878d6c04bd6f46fe4ada4fb8f79b1e48

<div class="markdown_content"><p>Can you provide more information on which protocol you are using? If OPC-UA, you will need to add a symbol configuration to your project and assign symbol access in the symbol configuration to expose variables over OPC-UA. </p></div>

2023-03-21T00:37:01.771000Z2023-03-21T00:37:01.771000Zfawvromanshttps://forge.codesys.com/u/fawvromans/https://forge.codesys.comb1310d499a9f9d54690bdf68093c5c6063b3895d

<div class="markdown_content"><p>Hi,</p> <p>I'm re-doing an assignement for my studies. The software that has been provided by my study is now outdated. I've updated to Codesys V3.5 SP19. I am relatively new at this. I'm trying to export my tags and checking them using Matrikon OPC Explorer. The Tags are not showing and I get the line 'Operation: CmpID = 0x00000019, ID = 0x1, enable = 1, alive = 0, timeout = 10000 <span>[FAILED]</span>' in the control win x64. Is this related or am I dealing with two sepperate issues? And how can I solve my issue(s)? Anyone who can help please?</p></div>