Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

CSV Utility

2020-05-30
2022-09-20
  • jtellezarevalo - 2020-05-30

    Hi Everyone.
    I need a database in CSV format to be read into Codesys as input and then write data to another CSV file as output from a process. I am not sure how to use the CSV Utility. Is there a tutorial or document that explains the use of the library in a simple way step by step?
    I am using IIOT Libraries ST

    Thank you.

     

    Last edit: jtellezarevalo 2020-05-30
  • eschwellinger

    eschwellinger - 2020-05-30

    Hi,
    check the example project:
    "c:\Users\<yourwindowsusername>\CSV Utility SL\1.0.x.0\CSV Utility SL Example.project"
    and there is a helpfile here:
    "c:\Users\<yourwindowsusername>\CSV Utility SL\1.0.x.0\CSV Utility SL.chm" </yourwindowsusername></yourwindowsusername>

    BR
    Edwin

     

    Last edit: eschwellinger 2020-05-30
  • ravikg - 2022-03-15

    Hi,

    I bought IIOT Libraries ST and tried to compile example and got following alarm which I cannot get rid.

     
    • i-campbell

      i-campbell - 2022-03-16

      take it out of simulation mode, right click the device, and update the device to current version.

       
  • abdel - 2022-09-20

    I have the CSV Utility, I cannot find it anywhere

     

    Last edit: abdel 2022-09-20
  • eschwellinger

    eschwellinger - 2022-09-20

    still here: 'c:\Users\<yourwindowsusername>\CSV Utility SL\1.0.x.0\CSV Utility SL Example.project'</yourwindowsusername>

     
  • abdel - 2022-09-20

    Thank you so much

     

    Last edit: abdel 2022-09-20
  • eschwellinger

    eschwellinger - 2022-09-20

    which version are you on?
    If this is 3.5Sp17 or SP18 based you could get it by the CODESYS Installer - install
    IIOT libs.
    CSV will be installed as part of this package.
    If you are older then 3.5SP17 version donwload IIOT library from CODESYS Store and install it via PackageManager.

     
  • abdel - 2022-09-20

    Everything works now! Thank you so much! May I know how exactly I can get the values in the CSV file to be read as an input to another function? I am trying to use CSV utility with the OSCAT basic function block SET_DT

     

    Last edit: abdel 2022-09-21

Log in to post a comment.