https://forge.codesys.com/forge/talk/Engineering/thread/81600daf9e/2020-02-27T13:50:10.858000ZRecent posts to WAGO 750-631/000-0102020-02-27T13:50:10.858000Z2020-02-27T13:50:10.858000Zdemedeirosahttps://forge.codesys.com/u/demedeirosa/https://forge.codesys.comfca2bd8dac4311fd333f997ca91506d523707a4d

<div class="markdown_content"><p>Thank you! That did work, I appreciate your help!!</p></div>

2020-02-27T13:50:10.668000Z2020-02-27T13:50:10.668000Zjosepmariaramshttps://forge.codesys.com/u/josepmariarams/https://forge.codesys.comb0f2197daac8a917d84d0d6fb5d6959161bb9316

<div class="markdown_content"><p>If use parent bus settings, the variable is refreshed with the task of the mapped variable. If there is not any mapped variable the value is not actualized.</p> <p>In ethercat slaves, you change it in the screen you have posted in the right bottom part.</p> <p>Sent from my Moto G (5S) Plus using Tapatalk</p></div>

2020-02-27T13:50:10.512000Z2020-02-27T13:50:10.512000Zdemedeirosahttps://forge.codesys.com/u/demedeirosa/https://forge.codesys.comf33c7dee9b90abd0693f00687a1deffdba7486e2

<div class="markdown_content"><p>Thank you for the comment. I am not sure what you mean by:</p> <blockquote> <p><strong>Zitat:</strong><br/> Test when input variables are actualized.</p> </blockquote> <p>Bus Cycle options under the PFC200Bus is set to "Use parent bus cycle settings", however I have also had it using the main task as well. Neither of these had yielded anything.</p></div>

2020-02-27T13:50:10.410000Z2020-02-27T13:50:10.410000Zjosepmariaramshttps://forge.codesys.com/u/josepmariarams/https://forge.codesys.combf0830c777c7a38953b341a5e6205fbae4c9a701

<div class="markdown_content"><p>Test when input variables are actualized.</p> <p>In maintask? ParentTask?.</p> <p>If is in parent task, you have to map your input to variables which runs in any task?</p> <p>Sent from my Moto G (5S) Plus using Tapatalk</p></div>

2020-02-27T13:50:10.015000Z2020-02-27T13:50:10.015000Zdemedeirosahttps://forge.codesys.com/u/demedeirosa/https://forge.codesys.com6b90be0b0cffc0d14421444886e30343f5d8e39e

<div class="markdown_content"><p>Hi,</p> <p>I am trying to communicate with the WAGO 750-631/000-010 encoder module. I have successfully added the device to the bus, however, when the system is running, I do not see any change in any of the variables on the 750-631. I can successfully toggle IO on another card however. On system run, the 750-632 "current value" column is grey. See attached picture.</p> <p>If I declare a variable, for CNT_VAL Channel 0, I do not see any change in my PLC program.</p> <p>Any thoughts as to what my issue may be? I am relatively new at Codesys and Wago, so I apologize for any glaring errors in advance.</p> <p>Thanks!</p> <p><img alt="IMG: Codesys.png" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=4436"/></p></div>