https://forge.codesys.com/forge/talk/Engineering/thread/8896dd3b71/2020-02-27T13:52:28.026000ZRecent posts to canopen codesys reset issue2020-02-27T13:52:28.026000Z2020-02-27T13:52:28.026000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com970b40f9e60c84a396ae68820ffafde4f4c531ba

<div class="markdown_content"><p>Hi,<br/> which plc in which version are you using?</p> <p>BR<br/> Edwin</p></div>

2020-02-27T13:52:27.846000Z2020-02-27T13:52:27.846000Zhaishenghttps://forge.codesys.com/u/haisheng/https://forge.codesys.comb8a9761558e415f46562b598d9efc6afc94485f2

<div class="markdown_content"><p>Hi, i am working on the canopen with codesys. I get a very strange observation, instead of sending the start signal to the otb (slave), with a canopen sniffer, i can see two reset signal in a very short time after the init phase to the otb. Only one otb is considered. And the process repeats, the otb never enters into the working state. Please see the attached file, the red line is a reset signal (Capture3.PNG). It should be a "start".</p> <p>Any information is highly appricieated. Thanks</p> <p><img alt="IMG: Capture3.PNG" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=3768"/></p> <p><img alt="IMG: Capture2.PNG" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=3767"/></p> <p><img alt="IMG: Capture1.PNG" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=3766"/></p> <p><img alt="IMG: Capture0.PNG" rel="nofollow" src="https://forum.codesys.com//download/file.php?id=3765"/></p></div>