https://forge.codesys.com/forge/talk/Engineering/thread/8ee367b167/2020-02-27T13:56:34.880000ZRecent posts to Ethernet IP Address - Route to tag?2020-02-27T13:56:34.880000Z2020-02-27T13:56:34.880000Zjamesbuniakhttps://forge.codesys.com/u/jamesbuniak/https://forge.codesys.com4915ee0ddc2d9b11d80cc8ee164c2c7c4a120da0

<div class="markdown_content"><p>I am trying to use an Ethernet field bus device communicating as a Modbus Master/Slave configuration and would like the end user to be able to change the IP address of the slave device. </p> <p>This device will be going into locations where non programmers will be entering in the IP address.</p> <p>Does anyone know if this is possible? </p> <p><strong>Field bus</strong><br/> Name: Ethernet<br/> Vendor: 3S - Smart Software Solutions GmbH<br/> Categories: Ethernet Adapter, Ethernet Adapter, Ethernet Adapter<br/> Type: 110<br/> ID: 0000 0002<br/> Version: 3.5.7.0<br/> Order Number: -<br/> Description: Ethernet Link.</p> <p><strong>Modbus Master</strong><br/> Name: Modbus TCP Master<br/> Vendor: 3S - Smart Software Solutions GmbH<br/> Categories: Modbus TCP Master<br/> Type: 88<br/> ID: 0000 0003<br/> Version: 3.5.9.0<br/> Order Number: -<br/> Description: A device that works as a Modbus Master on Ethernet.</p> <p><strong>Modbus Slave</strong><br/> Name: Modbus TCP Slave<br/> Vendor: 3S - Smart Software Solutions GmbH<br/> Categories: Modbus TCP Slave<br/> Type: 89<br/> ID: 0000 0005<br/> Version: 3.5.7.0<br/> Order Number: -<br/> Description: A generic Modbus device that is configured as Slave for a Modbus TCP Master.<br/> Configuration version: 3.5.3.0</p> <p>Thank you,</p></div>