https://forge.codesys.com/forge/talk/Engineering/thread/93bc9ccba9/2021-09-02T16:11:34.660000ZRecent posts to Axioline PLCNext and Ethercat2021-09-02T16:11:34.660000Z2021-09-02T16:11:34.660000Zomiidlahttps://forge.codesys.com/u/omiidla/https://forge.codesys.com4c4a18ce94f99c51e837f7266eefdc11179cce42

<div class="markdown_content"><p>That seems to have worked, thanks!</p></div>

2021-09-02T07:45:25.156000Z2021-09-02T07:45:25.156000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.come4518745c7a3cec95ef2f3bd4d610c858878b2f1

<div class="markdown_content"><p>Hi,<br/> you need to set:<br/> in <strong>/etc/CODESYSControl_User.cfg</strong><br/> <span>[SysEthernet]</span><br/> Linux.ProtocolFilter=3<br/> DSATagMode=1<br/> <strong>DSATagPort=0</strong></p></div>

2021-09-01T16:14:10.683000Z2021-09-01T16:14:10.683000Zomiidlahttps://forge.codesys.com/u/omiidla/https://forge.codesys.coma9c0c5acaf8a4cae538def6c69f00bb1514f0164

<div class="markdown_content"><p>Hi,<br/> I'm running a (v 3.5.17.0) compiler on Phoenix-Contact PLCNext 2152/2404267 (Codesys control for PLCNext v4.1.0.0, using 2021.0 LTS firmware) as an ETHERCAT master. The system also uses an extension module for the additional network interface (AXC F XT ETH 1TX/2403115, Intel I210 based). </p> <p>If i use eth0 or the primary network interface as the Ethercat master, everything is running fine, my existing Ethercat devices are found and accessible. If i switch the master to use enp1s0 - the network interface on the extension module - I find no devices, and no alarm messages other than a warning of no slaves found. Upon initiation, the device complains about incomplete or missing configuration, or no bus traffic.</p> <p>Any idea what I'm doing wrong here?</p></div>