TON ST Simulation

2020-02-27T13:57:37.926000Z

Ah, That makes sense now.
Did some testing with your suggestion.

I now understand that the internal variables are only updated during a call of TON_1().
However, after the first call, the actual timer continues on without the need of TON_1 being called.

So correct me if I am wrong,
but I understand that you only need to call TON_1() twice for a single use of the TON?
Once to start the timer.
Once to update the variables AFTER PT has expired.
However in practice this isn't possible, which is why we check each loop of the program (or use an internal for/while loop) to continuously update the internal variables.

TON ST Simulation

2020-02-27T13:57:37.116000Z

Hi,
you never call the instance of the timer(you just set the Inputs of the instance)
TON_2();

Regards
plcmax

TON ST Simulation

2020-02-27T13:57:36.846000Z

Hello Team,

Ran into quite a baffling situation.
I am able to easily setup and run a TON timer when using the CFC style of graphic code...
However, I find in certain setups the ST version doesn't function

Is this a limitation of the software? Or a Bug? Or is there something I am missing?
(I am running the code in Simulation, as I have no machine to deploy to at this time.
Both run under the Main task in a PRG POU)

ST Attempt 1 (Simple works correctly)

VAR
   TON_1 : TON;   
   TimeOut  : BOOL;
   ValueIN : BOOl;
END_VAR
TON_1( IN:= ValueIN, PT:= T#5S);
TimeOut := TON_1.Q;

ST Attempt 2 (Complex, doesn't work)

VAR
   TON_2 : TON;
   ValueIN : BOOL := TRUE;
   OUT : BOOL;
   Delay : TIME := T#5S;
   
END_VAR
TON_2.PT := Delay;
TON_2.IN := ValueIN;
OUT := TON_2.Q;

TON_2.ET doesn't count up at all, despite TON_2.IN Being TRUE.
I decided to place the TON_2.PT in an init IF statement so it only runs once, and still nothing happened with the timer.

I am curious why this is the case?

Recent posts to TON ST Simulation

TON ST Simulation

TON ST Simulation

TON ST Simulation