https://forge.codesys.com/forge/talk/Engineering/thread/a85330dd37/2025-03-19T09:27:28.525000ZRecent posts to Ethernet/IP Scanner Exception2025-03-19T09:27:28.525000Z2025-03-19T09:27:28.525000ZDave_Thttps://forge.codesys.com/u/nz-dave/https://forge.codesys.com6eb88a23b1b30fc6c868054eea17f42ac064385a

<div class="markdown_content"><p>Hi Trusty-Squire, just seen you post , thanks for the reply.</p> <p>I was out on site the other day as it had done it again and changed a few things like cycle time etc. plc load is only 7% at its highest.<br/> I took a few screenshots while i was there to add to this post.<br/> its been up for about a week now but seems to happen at random every couple of weeks. fingers crossed!</p></div>

2025-03-12T18:16:55.365000Z2025-03-12T18:16:55.365000Ztrusty-squirehttps://forge.codesys.com/u/trusty-squire/https://forge.codesys.comaee1e8f9d417f70c9a2e0ecc0db1f70635750bb5

<div class="markdown_content"><p>What is the task configuration? When you are online and look at the task monitor, what does it show? (Put a screenshot here). If the processor is overloaded you'll likely need to increase the cycle interval, disable the watchdog, or change to a cyclic task instead of interval based? Also, You might want to adjust your task priorities so they don't all have the same priority.</p> <p>Just a few thoughts, although looking at the task monitor would help in troubleshooting.</p></div>

2025-03-12T18:16:46.377000Z2025-03-12T18:16:46.377000Ztrusty-squirehttps://forge.codesys.com/u/trusty-squire/https://forge.codesys.comdc2b4407d20bb1a0cb2d7caa7a5d234eb512b434

<div class="markdown_content"><p>What is the task configuration? When you are online and look at the task monitor, what does it show? (Put a screenshot here). If the processor is overloaded you'll likely need to increase the cycle interval, disable the watchdog, or change to a cyclic task instead of interval based? Also, You might want to adjust your task priorities so they don't all have the same priority.</p> <p>Just a few thoughts, although looking at the task monitor would help in troubleshooting.</p></div>

2025-03-09T08:24:51.428000Z2025-03-09T08:24:51.428000ZDave_Thttps://forge.codesys.com/u/nz-dave/https://forge.codesys.com27e6115257ce0390e906cfc406b8cd66edaebc87

<div class="markdown_content"><p>Any ideas?. Still stopping on this exception randomly every couple of weeks.<br/> very frustrating.</p></div>

2024-12-28T07:07:13.122000Z2024-12-28T07:07:13.122000Znz-davehttps://forge.codesys.com/u/nz-dave/https://forge.codesys.com7cd15e916b1513be7ff73f541fe2e6289add5794

<div class="markdown_content"><p>3.5,18,30<br/> The Weintek HMI Runs a dual core CPU.. one for the HMI and one "real time OS" for Running Codesys.</p></div>

2024-12-28T06:40:51.441000Z2024-12-28T06:40:51.441000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.come9e7328c50fb832ac2749bcbe98fa38b4750a2fc

<div class="markdown_content"><p>which runtime version and dies this device has an realtime kernel?</p></div>

2024-12-27T08:09:04.666000Z2024-12-27T08:09:04.666000Znz-davehttps://forge.codesys.com/u/nz-dave/https://forge.codesys.com09d7b44c87f10398b6cb8fe0db0fb164edabb543

<div class="markdown_content"><p>see attached</p></div>

2024-12-27T08:03:05.502000Z2024-12-27T08:03:05.502000Znz-davehttps://forge.codesys.com/u/nz-dave/https://forge.codesys.comd9d886d9c86274127009303cc6eb40beb6bc41b7

<div class="markdown_content"><p>Its Running on a Weintek CMT HMI.<br/> the program is not huge, just controlling a few pumps.</p></div>

2024-11-28T09:49:54.831000Z2024-11-28T09:49:54.831000Zaikapanhttps://forge.codesys.com/u/aikapan/https://forge.codesys.comf876394f5f0bdfa336ba5ba468568aad2abc617a

<div class="markdown_content"><p>Same here. plcload in my case is about 7% while running.<br/> Watchdog ENIPScannerIOTask was about 200ms. Max cycle around 6ms, normal cycle time 4ms.</p> <p>Probably just increase the watchdog to 2000ms? or so...</p> <p>(Hardware: A Panel from Weintek)</p></div>

2024-11-17T08:58:19.929000Z2024-11-17T08:58:19.929000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.coma7689c3865db49d368dc6611ea3087a1de171c9f

<div class="markdown_content"><p>Which plc is this - seems that the performance of this device is not enough.<br/> You could check the plcload in the plcshell by 'plcload'</p></div>