Recent posts to PFC200 with Codesys: memory slowly filling up untill PLC hangshttps://forge.codesys.com/forge/talk/Engineering/thread/a9e5785ef9/2020-11-02T19:17:53.080000ZRecent posts to PFC200 with Codesys: memory slowly filling up untill PLC hangsPFC200 with Codesys: memory slowly filling up untill PLC hangs2020-11-02T19:17:53.080000Z2020-11-02T19:17:53.080000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com52ef634cb4eb1d826d963f2b2ddf68068dc64f2d<div class="markdown_content"><p>ok thanks</p></div>PFC200 with Codesys: memory slowly filling up untill PLC hangs2020-11-02T14:48:01.319000Z2020-11-02T14:48:01.319000Zbenbammenshttps://forge.codesys.com/u/benbammens/https://forge.codesys.comcb59338ba7191c2c7be8f65374ecdee7a6340eca<div class="markdown_content"><p>OK, done: MHL-772-52123</p></div>PFC200 with Codesys: memory slowly filling up untill PLC hangs2020-11-02T13:42:52.758000Z2020-11-02T13:42:52.758000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com03c569daabb12c91c2ec56684a2febe896bf5d35<div class="markdown_content"><p>could you report this to CODESYS Store-> my question bug report?<br/>
Add project archive and steps to repeat please.</p></div>PFC200 with Codesys: memory slowly filling up untill PLC hangs2020-11-02T11:23:59.256000Z2020-11-02T11:23:59.256000Zbenbammenshttps://forge.codesys.com/u/benbammens/https://forge.codesys.comb1d42483a6e8fd635996e64da991f07747332380<div class="markdown_content"><p>Hello,</p>
<p>I am having a very annoying problem. I have programmed a PFC200 with codesys 3.5 for my home automation. It controls my lights and my heating (with the HVAC Building & Process Automation SL library) (and a couple of energy meters). <br/>
I also have a visualisation for the heating. <br/>
When I start the PLC everything is fine. 50% CPU load and 17% memory use. The problem is that every day the memory use goes up by about 5-10% (give or take) until it is completely full and the PLC stops working. Really enoying because if this happens at night it means no more lights an no heating.</p>
<p>The only thing that works is disconnecting power to the PLC and reconnecting it. Everything starts from the beginning.</p>
<p>Doing a soft reset (reboot via SSH) works only for a very short time and the process of filling the memory goes a lot faster. </p></div>