Recent posts to CFC Pages Cut&Paste is not working at its besthttps://forge.codesys.com/forge/talk/Engineering/thread/cadd8b2d19/2025-05-15T08:53:15.222000ZRecent posts to CFC Pages Cut&Paste is not working at its bestCFC Pages Cut&Paste is not working at its best2025-05-15T08:53:15.222000Z2025-05-15T08:53:15.222000ZUlvishttps://forge.codesys.com/u/ulvis/https://forge.codesys.comc7e0ee9c9a93497f1f0ee208e8e41c42c067c97c<div class="markdown_content"><p>In the CFC page oriendted editor, if I copy some elements consisting of an input connector, some connected logic and an output connector and then paste this on a another page then the pasted elements get inserted with an offset to the right so that the rightmost connector falls outside of the page, in the grey hatched area. So far so good. Then I mark all the elements and try to drag them into the correct placement, collectively. THIS IS NOT POSSIBLE! I only get the "forbidden" icon tooltip. One has to drag & drop the INDIVIDUAL elements to move the elements around.<br/>
What am I doing wrong?</p></div>