https://forge.codesys.com/forge/talk/Engineering/thread/cedb329cc7/2023-08-25T06:20:43.190000ZRecent posts to Connection to device closed2023-08-25T06:20:43.190000Z2023-08-25T06:20:43.190000Zmozedhttps://forge.codesys.com/u/mozed/https://forge.codesys.com13336f9fa1d57e52442f39eca78d549f3b453120

<div class="markdown_content"><p>i found this error in /opt/CoDeSysControl/Files</p></div>

2023-08-24T06:06:31.109000Z2023-08-24T06:06:31.109000Zmozedhttps://forge.codesys.com/u/mozed/https://forge.codesys.comc23f6e661ee0b4b1a6eaa0fa1709fa09ac5df6a6

<div class="markdown_content"><p>Hello,</p> <p>Exulting the command /opt/CoDeSysControl/Files/run restart debug I get this response from the linux terminal:(ScreenShot1 to ScreenShot7)</p> <p>When I try to reconnect via codesys this line appears at the linux terminal level:(ScreenShot8)</p> <p>A few seconds later, the error window appears on Codesys.(ScreenShot9)</p> <p>I see that following the command /opt/CoDeSysControl/Files/run restart debug there are errors, are they the problem?</p> <p>Sincerely,</p></div>

2023-08-24T03:52:14.886000Z2023-08-24T03:52:14.886000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.come7b458e10f2f7ecdc90b867674c19ad311cda637

<div class="markdown_content"><p>is there a way to check the plclog on Opus A3 by using cmd line under Linux? This log is what you need to check for the disconnection problem</p></div>

2023-08-23T13:45:02.442000Z2023-08-23T13:45:02.442000Zmozedhttps://forge.codesys.com/u/mozed/https://forge.codesys.com3e6b40c9176366b64d38ea1b549ead3109397ef9

<div class="markdown_content"><p>Hello</p> <p>I am using an OpusA3 with version 3.5 SP17 Patch 3 as part of a project. I had no real problem before I encountered a problem that blocked me.<br/> The detection of the OpusA3 from Codesys is done correctly. The gateway is well configured and if I ping the gateway or the OpusA3 I receive the response correctly.<br/> The problem is that when I try to connect, the Opus screen freezes and a few moments later Codesys displays an error message ("connection to device closed").<br/> I tried to change PC, to update the runtime, to change OpusA3 but the problem remains the same. I'm a little lost knowing that before it worked without problem.<br/> I went back to a previous version of the project (where it worked correctly) but the message still appears.<br/> Do you have any clues to solve the problem?</p> <p>Sincerely,</p></div>