https://forge.codesys.com/forge/talk/Engineering/thread/cf0f95a15e/2023-06-03T00:58:53.493000ZRecent posts to Ethernet IP Adapter and Scanner In Same Project2023-06-03T00:58:53.493000Z2023-06-03T00:58:53.493000Zrichard-wanghttps://forge.codesys.com/u/richard-wang/https://forge.codesys.comd61d92305a234e7edaf6b1041335f23dd47c24c2

<div class="markdown_content"><p>I followed your suggestion, problem solved, THX</p></div>

2023-06-03T00:31:35.191000Z2023-06-03T00:31:35.191000Zrichard-wanghttps://forge.codesys.com/u/richard-wang/https://forge.codesys.com4b0306fb23dce394f60d342e2d3a198b0c86d248

<div class="markdown_content"><p>I have the same problem, just curious, did you solve this problem? Do you have to upgrade your codesys software? </p></div>

2023-03-22T23:34:11.017000Z2023-03-22T23:34:11.017000ZAlfredoQuinterohttps://forge.codesys.com/u/alfredoquintero/https://forge.codesys.comd39950ede1a5996e3aabc4c9a0ca63d082a28906

<div class="markdown_content"><p>This is very useful. Thanks for posting the solution.</p></div>

2023-03-22T20:34:13.240000Z2023-03-22T20:34:13.240000Zmrbaltarhttps://forge.codesys.com/u/mrbaltar/https://forge.codesys.com3180d650264d90ce7e43739a19f059b84e5b2e1f

<div class="markdown_content"><p>Got a reply from Codesys support. This was a bug. It is fixed by upping Ethernet/IP from 4.3.0.0 to 4.4.0.0+. Now both can be added in a project.</p></div>

2022-12-13T18:48:41.850000Z2022-12-13T18:48:41.850000Zmrbaltarhttps://forge.codesys.com/u/mrbaltar/https://forge.codesys.combc4eb91cb59b46cd7a283e66cf450200164cea67

<div class="markdown_content"><p>Since migrating to Codesys V3.5.18 (64-bit) I am no longer able to add both an ethernet/IP adapter and an ethernet/IP scanner to a project. I receive three compile errors (attached). As soon as I remove either one of these the code compiles fine, meaning I can get an adapter to work or a scanner to work, but not together. The Codesys help shows both in a project, and it used to work on V3.5.16. Below is a link to the help page. I've tried adding another NIC and moving one to there. I got the same error. I also tried switching my application from a Pi to a PC. That did not help. Anyone else seen this or have a solution? For clarity, the reason I need both is that I need the Codesys PLC to be able to talk to a Rockwell PLC via implicit messaging. I also need to be able to talk to a bunch of Cognex cameras over ethernet/IP.</p> <p><a href="https://help.codesys.com/webapp/_enic_f_scanner;product=core_EthernetIP_Configuration_Editor;version=4.1.0.0" rel="nofollow">https://help.codesys.com/webapp/_enic_f_scanner;product=core_EthernetIP_Configuration_Editor;version=4.1.0.0</a></p></div>